How to Confirm a UN 38.3 Test Summary Covers Your Actual LiFePO4 Battery Model

Nov 20, 2026

Leave a message

How to Confirm a UN 38.3 Test Summary Covers Your LiFePO4 Battery Model

Compliance Verification · Procurement Guide

How to Confirm a UN 38.3 Test Summary Covers Your Actual LiFePO4 Battery Model

A UN 38.3 certificate in the file is not enough. Here is the exact method procurement managers use to prove the document matches the pack they are buying.

A UN 38.3 test summary is useful only if it describes the exact battery you are buying. Matching the model number, watt-hour rating and report ID on the summary to the goods on your purchase order is what turns a claim into evidence.

Key takeaways for procurement managers

  • The model number on the summary must match your nameplate and purchase order exactly - not approximately.
  • Three identifiers decide coverage: model number, watt-hour (Wh) rating and the unique test report ID.
  • Under section 38.3.2.1, a rechargeable design changing more than 20% in Wh or voltage is a new type that needs retesting.
  • A pack built from tested cells is covered only if the assembly conditions in 38.3.3(f) and (g) are met.
  • "We have a UN 38.3 certificate" is a claim. Cross-checking the fields is proof.

1Why the certificate in the file is not enough

Most procurement teams treat UN 38.3 as a yes-or-no document: the supplier has one, so the shipment must be compliant. In practice, one of the most common reasons a lithium battery shipment is held or rejected is not a missing test summary but a summary that describes a different model from the goods in the carton.

The test summary is a formal declaration about a specific cell or battery type. If the designation on that document does not match your pack - or if your pack was assembled from cells whose type differs beyond the allowed thresholds - the document does not cover your goods, however authentic it is. At the airport or container yard nobody evaluates the chemistry. They compare identifiers on paper.

Three layers are easy to confuse, and knowing which one you are looking at is the first step:

  • Cell model - the individual lithium-ion cell inside the pack.
  • Battery / pack model - the assembled LiFePO4 pack you actually purchase.
  • Product model - used when the summary was issued for a device that contains the battery.

A supplier may hold a perfectly valid cell-level summary but have no pack-level coverage at all. That gap only becomes visible when someone compares the model fields line by line.

2What a UN 38.3 test summary must contain

Under section 38.3.5 of the UN Manual of Tests and Criteria and section 2.9.4(g) of the Model Regulations, manufacturers and distributors must make a test summary available. It is not the full laboratory report - it is a shorter document, but it must contain twelve defined items. Four blocks matter most for model verification:

A

Issuer and laboratory (items a–c)

Identity

What it lists: the cell, battery or product manufacturer's name; that manufacturer's contact details (address, phone, email, website); and the test laboratory's name and contact details.

Why it matters: the manufacturer named here must be the legal entity on your invoice. A summary from a different company does not cover your goods.

Check: manufacturer name matches the supplier of record; laboratory has a traceable web presence.
B

Report identity (items d–e)

Traceability

What it lists: a unique test report identification number and the date of the report.

Why it matters: the report ID is the thread that connects the summary back to the original laboratory record. Without it, the document cannot be verified.

Check: the same report ID appears on the full report and in your supplier's file.
C

Description of the battery (item f)

Model

What it lists: the chemistry (lithium ion, lithium metal or sodium ion); mass; watt-hour rating or lithium content; a physical description; and - critically - the cell or battery model number, or the product model number if the summary was established for a product containing the battery.

Why it matters: this is the block where model coverage is decided. Item (f)(v) is the field to compare against your purchase order.

Check: model number and Wh rating both match your pack exactly.
D

Tests and sign-off (items g–l)

Results

What it lists: the mandatory tests under 38.3.4 with pass/fail results (T1 through T8); any tests under 38.3.5 used for classification; the state of charge at which the battery was tested where applicable; the reference to assembled battery testing requirements under 38.3.3(f) and (g); the revision of the Manual used and any amendments; and the signature, name and title of a responsible person.

Check: every T1–T8 result reads "pass"; a named person has signed; a Manual revision is stated.

3The three identifiers that must match your pack

For a procurement review you rarely need to read the whole summary. Cross-check three identifiers against your own documents - the purchase order, nameplate, specification sheet, SDS and shipper's declaration:

Identifier Where it appears What it must match What a mismatch means
Model number Item (f)(v) Exact designation on your pack nameplate and PO Summary does not cover this pack
Watt-hour rating Item (f)(iii) Nominal voltage × rated Ah Wrong capacity or voltage version
Test report ID Item (d) Same ID on the full report and shipper's file Untraceable or copied document

Treat a one-character difference as a mismatch until the supplier proves otherwise. A trailing suffix - -B, /S, Rev.C - often marks a different cell, a different BMS or a different enclosure, and any of those can change the tested type. Ask for a written explanation rather than accepting a verbal assurance.

Practical tip: write the required model designation on the purchase order exactly as it appears in the test summary. This removes ambiguity at the documentation stage and gives you a clean basis for comparison.

4Cell-level vs pack-level coverage

A LiFePO4 pack is an assembly of cells. Whether a cell-level summary covers the finished pack depends on the assembly conditions defined in the Manual.

Situation What covers the shipment Action for the buyer
Pack built only from tested cells, with protection against overcharge, short circuit and over-discharge Cell-level summary may apply, with the assembly reference recorded Ask supplier to state the 38.3.3(f)/(g) reference
Pack design changed - different cell, BMS, capacity or voltage New pack type Require a pack-level test summary
Summary names only the device the battery sits in Product-level summary Confirm it also lists the battery / pack model
Large battery (over 12 kg gross mass, or cells over 150 Wh) Separate large-format testing rules apply Request the specific large-battery summary

When you buy a pack such as a 48V LiFePO4 battery pack or a 12.8V 100Ah pack, ask explicitly which level the document covers. "It passed UN 38.3" is not a complete answer.

5The 20% rule: when a "similar" model is a new type

Suppliers often argue that a slightly different capacity is "the same model." The Manual sets an objective threshold in section 38.3.2.1, and applying it is the most useful calculation a procurement manager can make before accepting a document.

Change to a tested type Threshold Result
Watt-hour rating (rechargeable Li-ion) Change of more than 20% New type - retest required
Voltage (rechargeable Li-ion) Increase of more than 20% New type - retest required
Cathode, anode or electrolyte (primary cells) Change over 0.1 g or 20% by mass, whichever is greater New type - retest required
Any other design change One that materially affects test results New type - retest required

Worked example: a tested 12.8V 100Ah pack is 1,280 Wh. A 110Ah version is 1,408 Wh - a change of about 10%, generally still within the same type. A 130Ah version is 1,664 Wh - about 30%, beyond the 20% threshold. That larger pack must be treated as a new type with its own test summary. The same logic applies to a 12.8V 200Ah or 12.8V 300Ah variant.

Important: if a type fails one or more tests, the deficiency must be corrected and the type retested. A summary showing any T1–T8 result other than "pass" is not a certification - request a new summary before release.

6A five-step verification workflow

  1. Collect the right document. Request the summary for the exact model on your PO, plus the full report reference.
  2. Match the three identifiers. Compare model number, Wh rating and report ID across the summary, nameplate, spec sheet and DG declaration.
  3. Confirm the build level. Establish whether the document is cell-level or pack-level, and note the 38.3.3(f)/(g) assembly reference.
  4. Apply the 20% test. If your pack differs in capacity or voltage from the tested model, do the percentage calculation in writing.
  5. Check the sign-off and revision. Confirm the Manual revision stated and the named signatory, then file the summary and report together.

Five questions to put to any supplier before you release a purchase order:

  • "Is this summary for the cell, the pack, or the finished product?"
  • "Does the model number on the summary match the nameplate of the goods you will ship?"
  • "What is the unique test report ID, and which laboratory issued it?"
  • "Which revision of the UN Manual of Tests and Criteria was used?"
  • "Have the cell, BMS or enclosure changed since this summary was issued?"

7Red flags that should stop the shipment

  • The model number is generic ("LiFePO4 battery pack") or left blank.
  • The Wh rating is missing, or does not equal nominal voltage × rated Ah.
  • There is no report ID, no laboratory contact, or no signature.
  • The manufacturer named on the summary differs from the invoice issuer.
  • A "similar model" claim is made with no 20% calculation to support it.
  • The stated Manual revision is old relative to the current edition of the IATA Dangerous Goods Regulations and UN Model Regulations.
  • Any T1–T8 test result is marked "fail" or left empty.

Any one of these is a reason to pause, not to negotiate around. A supplier who can produce a clean, traceable summary will welcome these questions; one who cannot will usually delay or deflect.

8RYDBATT LiFePO4 packs with traceable documentation

Every RYDBATT LiFePO4 pack is supplied with a UN 38.3 test summary whose model designation and watt-hour rating match the goods shipped. Ask for the document pack at quotation stage and verify the fields before you place an order.

You can also review our certification and test documentation before requesting a model-specific document pack.

9Frequently asked questions

Does having a UN 38.3 certificate automatically cover my battery model?

No. A UN 38.3 test summary is a declaration about one specific cell or battery type. It covers your shipment only if the model number and watt-hour rating match the pack you are buying. A certificate for a different model does not transfer to your goods, even if it is genuine.

What is the 20% rule for battery model variants?

Under section 38.3.2.1 of the UN Manual of Tests and Criteria, a rechargeable lithium-ion design that changes by more than 20% in watt-hour rating, or increases in voltage by more than 20%, is considered a new type and must be retested. Any change that materially affects test results also triggers retesting.

Is a cell-level test summary enough for a battery pack?

Only under specific assembly conditions. A pack built solely from tested cells may rely on the cell summary when the assembly prevents overcharge, short circuit and over-discharge, with the reference recorded under 38.3.3(f) and (g). If the cell, BMS, capacity or voltage changed, require a pack-level summary.

Which field on a test summary identifies the model?

Item (f)(v) requires the cell or battery model number, or the product model number if the summary was issued for a device containing the battery. Compare this field exactly against your purchase order, nameplate and specification sheet.

Can I use a UN 38.3 test summary from a different supplier?

No. The manufacturer name and contact details in items (a) and (b) must identify the legal entity that made your battery. A summary issued by another manufacturer does not cover your goods, and reusing one is a documentation failure that carriers and customs can detect.

What if the model number differs by one letter or suffix?

Treat it as a mismatch until the supplier proves otherwise. A trailing suffix often marks a different cell, BMS or enclosure, any of which can change the tested type. Request a written explanation and the relevant test documentation before the shipment is released.

How do I verify a test report ID is genuine?

Item (d) requires a unique test report identification number. Ask for the issuing laboratory's name and contact from item (c), then confirm the ID with that laboratory. A summary without a traceable report ID, laboratory contact or signature should not be accepted.

Need a model-matched UN 38.3 document pack?

Send us your battery model and quantity. RYDBATT will return the matching test summary, specification sheet and transport documents so you can verify every field before shipment.

RY

RYDBATT Compliance Team

Technical writers and compliance specialists at Shenzhen RYDBATT Electronics Co., Ltd., documenting lithium battery transport requirements for procurement and quality teams.

Send Inquiry