RYDBATT RYD-LFP12300-AGV - 12.8V 300Ah LiFePO4 Battery Pack for AGV / AMR / Low-Voltage Industrial Robots (OEM/ODM)
The RYD-LFP12300-AGV is a low-voltage, high-capacity LiFePO₄ module built on graded 32700 cells for AGV, AMR, cleaning robots, inspection vehicles and legacy low-voltage automation retrofits. 300Ah in a 515×268×220mm envelope, 13.8V charge window, 2000+ cycles at 80% DoD, with CAN/RS485 telemetry and enclosure geometry engineered backward from your battery bay.
✓ 12.8V 300Ah / 3840Wh ✓ 4S 32700 LFP ✓ 2000+ Cycles ✓ 13.8V Charge Window ✓ CAN/RS485 Optional ✓ Bay-Reverse Engineering
Application fit note: 24V and 48V remain the mainstream platforms for goods-to-person AMRs, tuggers and forklift AGVs. The 12.8V class serves a specific niche - latent/light-load AGVs, cleaning and inspection robots, and low-voltage legacy retrofits where the controller window is 10–15V. Send your controller's min/max operating voltage before we quote; if your platform is 24V/48V, we will route you to the matching module instead of forcing a 12V fit.
Visual Reference



Core Specifications
| Model | RYD-LFP12300-AGV (4S LFP, 32700 cells) |
|---|---|
| Chemistry | LiFePO₄ (LFP), graded 32700 cylindrical cells |
| Configuration | 4S, parallel count per capacity target |
| Nominal Voltage | 12.8V |
| Capacity / Energy | 300Ah nominal / ≥300Ah min · ≈3840Wh |
| Charge Voltage | 13.8V (BMS cut-off configurable) |
| Discharge Cut-off | 8.8V |
| Max Charge Current | ≤200A (BMS limited) |
| Continuous / Peak Discharge | Configured to AGV duty cycle - send continuous & peak Amp values |
| BMS | Protection + passive/active balancing; SoC/SoH; CAN 2.0B / RS485 / UART optional |
| Cycle Life | ≥2000 cycles @ 80% DoD (0.2C, 25±5°C) |
| Charge Retention | ≥85% after 28 days storage @ 25±5°C |
| Dimensions | 515 × 268 × 220 mm (engineering drawing per BOM; customizable) |
| Weight | Project-dependent - 32700 cylinder build ≈13.5kg class; aluminium/prismatic/heater variants heavier |
| Operating Temp. | Charge 10–45°C / Discharge -20–60°C |
| Enclosure | ABS+PC standard; sheet-metal / IP65 aluminium optional |
| Compliance | UN38.3 / MSDS baseline, RoHS, ISO 9001 manufacturing; CE / UL / IEC 62619 per project market |
Why RYD-LFP12300-AGV for Robotics Integrators
Bay-Reverse Engineering
- send battery-bay L×W×H and we design the enclosure to fit, not the other way around.
Protocol Ready
- CAN dictionary / RS485 map delivered with the pack, bench-tested against your controller.
2000+ Cycles
- LFP chemistry survives opportunity-charging duty cycles that kill SLA in 12 months.
Charge Window Control
- 13.8V CV with BMS cut-off tuned to your dock charger handshake.
Drop-in Retrofit
- replaces 12V 300Ah SLA/VRLA banks in legacy AGV fleets with weight and cycle-life gain.
One Accountability
- cell grading, PACK, BMS firmware and EOL test all in-house, no finger-pointing.
Target Applications
🤖
Latent / Light-Load AGV
🏭
AMR & Warehouse Robots
🧹
Cleaning & Scrubber Robots
🔍
Inspection & Patrol Robots
🛒
Low-Voltage Tuggers
♻️
12V SLA Fleet Retrofit
OEM / ODM Integration Scope
Electrical - continuous/peak current, charge profile, BMS thresholds, pre-charge, wake/sleep strategy.
Communication - CAN 2.0B dictionary, RS485 map, UART frame, SoC/SoH/cell-temp/fault reporting.
Mechanical - enclosure material, IP grade, mount points, handle, docking-plate cut-outs.
Thermal - natural / passive cooling, low-temp charging heater optional for cold stores.
Interface - Anderson / blind-mate docking connector / M8 terminal / custom harness.
Compliance - UN38.3/MSDS baseline; CE/UL/IEC 62619 scoped per destination market.
Engineering Workflow
| Phase | Deliverable | Typical Lead Time |
|---|---|---|
| Scoping | Voltage window, envelope, protocol, duty cycle confirmed in writing | 1–3 days |
| Design | 3D CAD, schematic, BMS config, DFM sign-off | 7–14 days |
| Prototype | Functional sample + EOL report + protocol doc | 15–25 days |
| Pilot | Small batch validated in your AGV | 20–30 days |
| Production | Automated line, 100% test records, DG shipping docs | 30–45 days |
Quality & Validation
| Stage | Control Point |
|---|---|
| Cell incoming | Capacity / IR grading, batch-matched 32700 LFP cells |
| BMS test | OVP/UVP/OCP/SCP/OTP, balancing, CAN/RS485 frame check |
| Formation | Charge-discharge cycle + 28-day retention抽样 aging |
| Mechanical | Vibration (AGV duty sim), drop, IP verification per enclosure |
| EOL | Capacity, IR, insulation, SoC accuracy, fault-log dump |
| Shipping | SoC-limited DG pack, UN3480/UN3481 docs per configuration |
Procurement FAQ
Q: Is 12.8V right for my AGV?
A: Only if your controller window sits inside roughly 10–15V. Most goods-to-person AMRs and forklift AGVs run 24V or 48V - tell us your controller min/max and we will route you to the correct platform rather than force a 12V fit.
Q: Can it replace our existing 12V 300Ah SLA bank?
A: Yes, electrically. Send the old bay drawing and charger model - we match the envelope, connector and charge handshake, and flag any ballast-weight dependency.
Q: Which communication protocol?
A: CAN 2.0B and RS485 are standard options; we deliver the dictionary/map with the pack and bench-test against your controller before pilot.
Q: What continuous current can it hold?
A: Depends on parallel count and BMS rating - send your AGV's continuous and peak Amp draw and we size the topology to it, not to a generic catalogue number.
Q: Support for opportunity / dock charging?
A: Yes. Charge current, CV setpoint and dock handshake are tuned per charger; blind-mate docking plates can be integrated into the enclosure.
Q: Certifications?
A: UN38.3/MSDS/RoHS baseline ships standard. CE, UL and IEC 62619 are scoped per destination market during the project - we do not pre-declare certificates we have not issued for your configuration.
Hot Tags: 12V 300Ah LiFePO4 AGV Battery OEM, LiFePO4 battery pack, 12V 300Ah LiFePO4 AGV Battery OEM manufacturer, 12V 300Ah LiFePO4 AGV Battery OEM supplier, OEM battery, RYDBATT, lifepo4 lithium battery pack, lifepo4 power pack, lifepo4 kit, lifepo4 powerpack, 12.8V 100Ah Replacment Battery for Lead Acid, 12.8V 24Ah Golf Battery

