LiFePO4 Battery for Light Electric Vehicles

LiFePO4 Battery for Light Electric Vehicles
Details:
A 51.2V 100Ah LiFePO4 battery pack for light electric vehicles is not a single cell in a box. It is a 16S lithium iron phosphate pack, a seven-function battery management system, a sealed enclosure, and a set of operating limits that have to hold across a decade of daily use. The RYDBATT R51100 assembles all of that into a 5.12 kWh unit measuring 389.6 x 275.1 x 270 mm and weighing 50 ± 2 kg, which makes it a drop-in answer rather than a rebuild. A 51.2V 100Ah LiFePO4 battery for light electric vehicles then has to justify itself on every shift after that, so the layers below matter more than the headline number. The design target was specific: these vehicles run in the 48V class, carry one to four people, work hard on gradients, sit outdoors, and cannot afford a service call mid-shift. A 51.2V 100Ah LiFePO4 battery pack solves each of those constraints at once, and the numbers below show how.
Send Inquiry
Description
Send Inquiry

 

Why 5.12 kWh Resolves The Range Question

Range is an energy question before it is a motor question. For a 51.2V 100Ah LiFePO4 battery for light electric vehicles, 5.12 kWh with a 130 A continuous discharge gives a typical 1 to 2 kW light electric vehicle covers 40 to 50 miles, or 64 to 80 km, per charge under normal duty. Against a 2.9 kWh lead-acid bank that is roughly a 76% increase in stored energy, and it is the difference between finishing a shift and looking for a charger before it.

The 176.9 Wh/L volumetric density is what makes that energy fit. A 48V lead-acid bank of comparable capacity occupies noticeably more bay volume for less usable energy, because lead-acid chemistry stores about a third of its rating as accessible capacity and needs the space for plates and acid. The lithium pack puts the same 5.12 kWh into a 15 x 11 x 11 in envelope, which is why the 51.2V 100Ah LiFePO4 battery for light electric vehicles works as a direct replacement instead of a compromise.

The Solution In Four Layers
 
 

01

 

Cell layer

Sixteen 3.2 V grade-A lithium iron phosphate cells, matched on capacity and internal resistance before welding. Sixteen in series gives 51.2 V nominal; 100 Ah at the terminal gives 5.12 kWh of usable energy, and the arithmetic is exact rather than approximate.

02

 

Protection layer

Seven active protection functions: over-charge, over-discharge, over-current, short circuit, low voltage, high temperature and passive balancing. The pack refuses the abuse that destroys a lithium bank rather than absorbing it.

03

 

Enclosure layer

An IP67 sealed housing at 28.94 litres, dust-tight and submersible to 1 m for 30 minutes. The same footprint as a 48V lead-acid bank, so the mechanical work is a swap rather than a redesign.

04

Service layer

More than 4,000 cycles at 80% depth of discharge, and no watering, no terminal cleaning and no equalisation anywhere in that life. A pack that needs no maintenance has no failure point to plan around.

Full Specification

 

 

Model RYD-51100 (R51100 series)
Battery type Lithium iron phosphate (LiFePO4)
Configuration 16S configuration, 16 x 3.2 V cells in series
Nominal voltage 51.2 V
Nominal capacity 100 Ah
Rated energy 5.12 kWh (5,120 Wh)
Charge voltage 58.4 V (3.65 V/cell, standard 16S LFP profile)
Continuous charge current 20 A
Continuous discharge current 130 A (1.30C)
Maximum charge current 40 A
Maximum discharge current 300 A (3.00C)
Cycle life > 4,000 cycles @ 80% DoD
Range per charge 40-50 miles (64-80 km)
Dimensions (L x W x H) 389.6 x 275.1 x 270 mm (15.34 x 10.83 x 10.63 in)
Weight 50 ± 2 kg (110.23 ± 4.41 lbs)
Enclosure volume 28.94 L
Energy density 102.4 Wh/kg / 176.9 Wh/L
Protection level IP67 dust and water resistant
Operating temperature -20 to 60 °C (discharge), 0-45 °C (charging)
Certifications UN38.3, UL, CE, ISO

 

 

 

Typical Deployments

 

Every deployment below runs on the same LiFePO4 battery for light electric vehicles, with the duty cycle and the environment being what actually separates one use from the next. 

Golf Carts & Club Cars
Drop-in replacement for 48V lead-acid banks with no chassis modification.

Low-Speed Electric VehiclesNeighbourhood vehicles, sightseeing cars, electric tricycles and mobility scooters.

Airport & Logistics Tugs Airport baggage tractors and last-mile delivery vehicles on shift duty.

Industrial Patrol & AGV Park patrol carts, automated guided vehicles and light warehouse fleets.

Light Equipment & Cleaning Compact electric forklifts, floor cleaning machines and custom AGV platforms.

 

Frequently Asked Questions

 

Straight answers to the questions procurement teams ask most often about this pack.

Q: Why 165 for this pack?

A: Sixteen lithium iron phosphate cells at 3.2 V nominal each give exactly 51.2 V, which is the voltage class a 48V light electric vehicle system runs on. The 16S configuration is what lets the pack replace a 48V lead-acid bank without a voltage converter, while the 100 Ah capacity at the terminal sets the
5.12 kWh energy. It is the same reason a 51.2V 100Ah LiFePO4 battery for light electric vehicles is a drop-in part for this vehicle class rather than an adaptation.

Q: What does the seven-layer BMS protection cover?

A: Over-charge, over-discharge, over-current, short circuit, low voltage, high temperature and cellbalancing. The balancing function runs in both charge and idle modes, so a pack standing between shifts recovers its balance rather than drifting, which is what keeps the pack usable in year five.

Q: How long does the 51.2V 100Ah LiFePO4 battery for light electric vehicles last?

A: More than 4,000 cycles at 80% depth of discharge, assuming normal-temperature charging and regular use. That is more than 10 years at one cycle a day, or 6 to 8 years at two to three cycles a day, and compares with 500 to 1,000 cycles for a lead-acid bank.

Q: Can it be charged in cold conditions?

A: Discharge is rated from -20°C to 60 C, but charging is limited to 0°C to 45 C. Charging a lithiumiron phosphate pack below freezing is the fastest way to plate lithium, so the BMS blocks it, and heated BMS or heated charging is the correct answer for cold-climate operation.

Q: What is the total cost advantage over lead-acid?

A: The pack costs more upfront and less over its life. With more than 4,000 cycles against 500 to 1,000, and with no watering, no terminal checks and no equalisation, the total cost of ownership typically crosses over during the first few years of fleet use.

Q: Which vehicles is this pack designed for?

A: Light electric vehicles in general: golf carts and club cars, neighbourhood electric vehicles, sightseeing cars, electric tricycles, mobility scooters, airport baggage tractors, last-mile delivery vehicles, industrial patrol carts, AGV platforms, light forklifts and floor cleaning machines.

 

 

 

Hot Tags: lifepo4 battery for light electric vehicles, golf cart battery, lifepo4 battery for light electric vehicles manufacturer, lifepo4 battery for light electric vehicles supplier, OEM battery, RYDBATT, 36V 10Ah Hai Long battery, 48V 12.8Ah Long Range battery, custom lithium polymer battery, inverter battery lithium ion, laptop battery lithium, polymer battery price

Send Inquiry