Supply Terms At A Glance
MOQ 50 pieces
The minimum order for a customised build, with stock allocation discussed for repeat orders.
01
Samples in 15-20 days
Prototype and sample units are produced against a confirmed drawing, ready for evaluation before volume.
02
Bulk in ~30 days
Volume production runs around 30 days once the solution drawing is approved and locked.
03
Global shipping
Air freight for urgent orders, sea freight for economical volume shipments, with the mode chosen per destination.
04
What You Receive With Each Order
Finished 51.2V 100Ah LiFePO4 pack at 5.12 kWh, 130 A continuous and 300 A peak discharge
Built-in seven-function BMS with over-charge, over-discharge, over-current, short-circuit, low-voltage and temperature protection plus cell balancing
IP67 dust and water resistant enclosure, 389.6 x 275.1 x 270 mm, 50 ± 2 kg
UN38.3 transport documentation, UL, CE and ISO certification, with region-specific packs on request
Controlled specification sheet and drawing for the exact build you order
Private label option, custom connector and harness, and RS485 or CAN communication where specified
| Model | RYD-51100 (R51100 series) |
|---|---|
| Battery type | Lithium iron phosphate (LiFePO4) |
| Configuration | 16S configuration, 16 x 3.2 V cells in series |
| Nominal voltage | 51.2 V |
| Nominal capacity | 100 Ah |
| Rated energy | 5.12 kWh (5,120 Wh) |
| Charge voltage | 58.4 V (3.65 V/cell, standard 16S LFP profile) |
| Continuous charge current | 20 A |
| Continuous discharge current | 130 A (1.30C) |
| Maximum charge current | 40 A |
| Maximum discharge current | 300 A (3.00C) |
| Cycle life | > 4,000 cycles @ 80% DoD |
| Range per charge | 40-50 miles (64-80 km) |
| Dimensions (L x W x H) | 389.6 x 275.1 x 270 mm (15.34 x 10.83 x 10.63 in) |
| Weight | 50 ± 2 kg (110.23 ± 4.41 lbs) |
| Enclosure volume | 28.94 L |
| Energy density | 102.4 Wh/kg / 176.9 Wh/L |
| Protection level | IP67 dust and water resistant |
| Operating temperature | -20 to 60 °C (discharge), 0-45 °C (charging) |
| Certifications | UN38.3, UL, CE, ISO |

Certifications And Quality Control
UN38.3
Transport safety compliance for lithium battery shipment
UL
Independent safety listing for the finished pack
CE
European market conformity marking
ISO
ISO-certified laboratory and management system
IP67
Dust-tight enclosure, submersible to 1 m for 30 minutes
Every pack clears a multi-stage protocol in our ISO-certified laboratories: UN38.3 transport safety, UL and CE conformity, IP67 ingress verification, environmental simulation from -40 °C to +85 °C, performance benchmarking against the rated 5.12 kWh, application-specific stress testing on finished assemblies, and accelerated lifecycle validation before volume shipment.
Why Operators Move From Lead-Acid
| Parameter | RYDBATT 51.2V 100Ah LiFePO4 | 48V lead-acid bank |
|---|---|---|
| Nominal voltage | 51.2 V | 48 V (nominal lead-acid bank) |
| Rated energy | 5.12 kWh | 2.9 kWh typical 6×8V bank |
| Cycle life @ 80% DoD | > 4,000 cycles | 500–1,000 cycles |
| Pack weight | 50 ± 2 kg | Heavier for equal bank size |
| Maintenance | None | Watering and terminal checks |
| Partial cycle tolerance | High usable capacity | Shallow cycles only |
| Water resistance | IP67 | Vent caps exposed |
| Cost per service year | Lower over service life | Higher with replacements |
Frequently Asked Questions
Q: What is the minimum order quantity for the RYD51100 51.2V 100Ah battery?
A: MOQ is 50 pieces on a customised build. Stock allocation can be discussed for repeat orders, and samples are available in 15 to 20 days ahead of any volume commitment.
Q: What is the lead time for a bulk order?
A: Around 30 days for bulk production once the solution drawing is confirmed, on top of shipping.
Samples take 15 to 20 days. Air freight is the fast option for urgent orders and sea freight is the economical one for volume.
Q: Which certifications ship with the battery?
A: UN38.3 transport safety, UL safety listing, CE conformity and ISO-certified production, with IP67
ingress protection verified on the finished enclosure. Region-specific documentation packs are available on request.
Q: Can I put my own brand on the pack?
A: Yes. Private label, customer artwork and barcode are all available on the custom RYD51100 51.2V
100Ah battery, along with custom connector, cable length and communication protocol.
Q: What is the full specification?
A: 51.2 V nominal, 100 Ah nominal, 5.12 kWh rated energy, 16S configuration. Continuous charge 20 A and maximum charge 40 A, continuous discharge 130 A and maximum discharge 300 A. More than
4,000 cycles at 80% DoD, IP67, 389.6 x 275.1 x 270 mm at 50 ± 2 kg.
Q: How do I get a wholesale quotation?
A: Send your quantity, destination and any specification changes. RYDBATT quotes factory-direct from the manufacturer, with the full technical package attached to the quotation.
Hot Tags: ryd51100 51.2v 100ah battery wholesale, golf cart battery, ryd51100 51.2v 100ah battery wholesale manufacturer, ryd51100 51.2v 100ah battery wholesale supplier, OEM battery, RYDBATT, 3 7 v li ion battery 3000mah, 48V 13Ah Ebike Battery, li ion battery 5000mah, li ion battery bank, lithium battery phone, portable lithium ion battery

