24V 3.84kWh Rack LiFePO4 Battery OEM Storage

24V 3.84kWh Rack LiFePO4 Battery OEM Storage
Details:
RYDBATT native 24V 150Ah LiFePO4 rack battery platform for off-grid solar, telecom backup, RV and marine house power. RS485/CAN, 3000+ cycles, parallel scalable, UN38.3. OEM/ODM supplier.
Send Inquiry
Description
Send Inquiry

 

24V 3.84kWh Rack LiFePO4 Battery

24V 3.84kWh Rack-Mount LiFePO4 Storage Platform

Native 24V 150Ah Module for Off-Grid Solar, Telecom Backup & Mobile Power

The RYDBATT RYD-24R3840 is a native 24V LiFePO4 module - no series stacking, no paired-battery balancing headaches. One enclosure delivers 3.84kWh, with RS485/CAN telemetry, rack or wall-mount form factor, and parallel expansion for larger banks. Built for integrators, telecom contractors, RV builders and off-grid EPCs who need predictable, repeatable packs in volume.

✓ Native 24V      ✓ 3.84kWh    ✓ Rack/Wall Mount  ✓ RS485 / CAN
✓ Parallel Ready  ✓ 3000+ Cycles

 

 

 

Platform RYD-24R3840
Chemistry LiFePO4 (LFP), Grade-A prismatic cells
Nominal Voltage 25.6V (native 24V class, 8S)
Capacity 150Ah
Energy 3.84kWh per module
Cycle Life ≥3000 cycles @ 80% DoD
Continuous Discharge 150A (configurable)
Peak Discharge Short-duration surge for inverter start
Max Charge Current 75A standard, higher on request
BMS Smart BMS: OV/UV/OCP/SCP/OTP + balancing
Communication RS485 standard, CAN 2.0B optional
Monitoring SoC/SoH, temp, current, fault log (LCD/Bluetooth optional)
Expansion Parallel up to 4–8 modules (config-dependent)
Mounting Rack-mount / wall-mount / cabinet
Ingress Rating IP20 indoor / IP65 enclosure optional
Operating Temp. -20~60℃ discharge / 0~45℃ charge
Low-Temp Option Heating film + charge cutoff below 0℃
Compliance UN38.3 / MSDS baseline; market docs per project
Supply Model Project pilot → volume supply, white/private label
 
 
Why Native 24V, Not Two 12V in Series
01.

Single BMS 
one protection domain, no cross-pack imbalance.

02.

Lower Current 
half the amps of 12V at same power, smaller cables, less heat.

03.

Inverter Friendly  pairs with 24V inverters, solar controllers, telecom rectifiers.

04.

Scalable
parallel modules grow capacity without changing voltage.

Target Applications

☀️
Off-Grid Solar & Cabins

📡
Telecom Base Stations

🚐
RV / Camper House Power

⛵
Marine House Bank

🏥
UPS & Industrial Backup

🏪
Small C&I Storage

System Integration
 

Inverter Match 

24V off-grid/hybrid inverters, LiFePO4 charge profile.

 

Comms 

RS485 register map / CAN DBC provided under NDA.

 

Parallel Logic 

current sharing, SoC sync, uniform cable length guidance.

 

Safety 

disconnect, pre-charge, insulation monitoring options.

 

Enclosure 

19" rack, wall bracket, IP65 outdoor cabinet variants.

 

Docs 

UN38.3, MSDS, transport SoC limit, per-batch test report.

Module vs Legacy Lead-Acid

Aspect RYD-24R3840 Lead-Acid Bank
Usable DoD 80–100% 50%
Cycle Life 3000+ cycles 300–500
Weight ~40% lighter heavy
Maintenance zero watering/equalizing
Efficiency ≥95% 70–85%
Series Risk none (native 24V) pair-matching needed

 

 

OEM / ODM for Integrators

Electrical

capacity, BMS current, charge window, low-temp.

Mechanical

rack height, terminal position, handle, mounting.

Software

RS485/CAN, SoC algorithm, LCD/Bluetooth app.

Branding

case color, logo, label, manual, retail pack.

Cert

UN38.3/MSDS baseline, regional docs per market.

Logistics

SoC-limited shipping, pallet/carton, DG freight.

 

Quality & Batch Consistency

Cell Grading  capacity/IR matched within module and across batch.

1

>>

Formation 
full cycle before shipment, EOL per serial.

2

>>

Validation 
thermal, vibration, short-circuit, communication test.

3

>>

Traceability 
serial → cell lot → BMS fw → test record.

4

>>

Reorder Lock 
spec frozen so repeat orders stay identical.

5

>>

Service 
spare pool, RMA swap, technical commissioning support.

6

 

Frequently Asked Questions

 

Q: Is this a true native 24V system?

A: Yes. 8S LiFePO4 in one enclosure, 25.6V nominal - no two 12V batteries in series, no paired balancing.

Q: Can I parallel multiple modules?

A: Yes. Up to several modules in parallel with matched cable lengths and same BMS config; exact count confirmed per project.

Q: Which inverters are supported?

A: Any 24V off-grid/hybrid inverter with LiFePO4 profile. RS485/CAN protocol docs provided under NDA.

Q: Can it charge in cold weather?

A: Standard version limits charging below 0℃; low-temperature heating option available.

Q: What certifications come with the pack?

A: UN38.3 test summary and MSDS baseline. Regional compliance docs prepared per market.

Q: What information do you need for a quote?

A: Load profile, inverter model, autonomy target, mounting type, comms need, quantity and destination market.

Hot Tags: 24v 3.84kwh rack lifepo4 battery oem storage, LiFePO4 battery pack, 24v 3.84kwh rack lifepo4 battery oem storage manufacturer, 24v 3.84kwh rack lifepo4 battery oem storage supplier, OEM battery, RYDBATT, 12.8V 200Ah Battery Pack, lifepo4 powerbank, lifepo4 kit, 24V 150Ah Battery, lifepo4 diy kit, 12.8V 24Ah Golf Battery

Send Inquiry