
Custom Smart BMS Platform (1S–32S)
Battery Management Systems Engineered as Part of the Whole Pack - Not a Standalone Board
The RYDBATT BMS platform treats the BMS as the brain of your battery system, not a commodity component. We co-define string count, cell chemistry, current rating, communication protocol, protection thresholds and firmware behavior together with your pack architecture - then validate the whole assembly, not just the board.
✓ 1S–32S ✓ Li-ion/NMC/LFP ✓ CAN/RS485/UART
✓ Active/Passive Balance ✓ SOC/SOH✓ UN38.3
| Platform | RYD-BMS-PLATFORM |
|---|---|
| Series Support | 1S to 32S (configurable string auto-identification) |
| Chemistry | Li-ion / NMC / LiFePO4 / LTO (firmware-selectable) |
| Continuous Current | 10A – 400A+ (board-class dependent) |
| Peak Current | 2× continuous for 1–5s (pre-charge & soft-start) |
| Communication | CAN 2.0B / RS485 (Modbus) / UART / SMBus / optional Bluetooth |
| Balancing | Passive (standard) / active (high-capacity packs) |
| Telemetry | Per-cell V, pack current, temperature, SoC, SoH, cycle count, fault log |
| Protection | OVP, UVP, OCP, SCP, OTP, cell mismatch, open-wire detection |
| SoC Algorithm | Coulomb counting + OCV correction + temperature compensation |
| Sampling Accuracy | Cell voltage ±10mV; current ±1% FS |
| Idle Consumption | <50µA deep-sleep (configurable wake sources) |
| Pre-charge / Contactor | Optional for high-voltage EV/ESS packs |
| Operating Temp. | -40℃ to +85℃ (industrial grade) |
| Firmware | Customizable thresholds, DBC/register map, OTA-ready |
| Validation | 200+ test points; aging, short-circuit, thermal cycle per batch |
| Compliance | UN38.3 / MSDS baseline; additional docs per market |
| Supply Model | BMS-only, BMS+pack turnkey, white-label / private-label |
Why BMS-as-a-System, Not a Board
Pack-Co-Design
BMS parameters matched to your cell grade, thermal layout and load profile.
01
Protocol Ready
CAN/RS485 out of the box; DBC and register map provided under NDA.
02
Field Telemetry
SoC/SoH and fault history for fleet and ESS monitoring.
03
Fail-Safe Logic
Staged protection: warning → derate → cutoff, not abrupt shutdown.
04
String & Current Reference
| Application | Config | Typical Current | Communication |
|---|---|---|---|
| Consumer / IoT | 1S–4S | 3–15A | UART / SMBus |
| E-bike / Scooter | 10S–13S | 20–45A | RS485 / CAN |
| Motorcycle / AGV | 16S–20S | 60–150A | CAN 2.0B |
| Golf Cart / LV EV | 16S LFP | 130–315A | CAN + RS485 |
| ESS / Storage | 16S–24S | 100–400A | CAN / RS485 / Modbus |
Core Functions
Protection
Over/under-voltage, over-current, short-circuit, over-temp, cell open detection.
Balancing
Passive standard; active optional for >100Ah / high-value packs.
Estimation
SoC, SoH, SOH, remaining runtime, internal resistance trend.
Diagnostics
Event logging, fault codes, black-box replay for warranty analysis.
Thermal
Multi-NTC, charge/discharge thermal strategy, pre-heat option.
Interface
Contactor drive, pre-charge, isolation monitoring (HV option).
OEM / ODM Customisation
Hardware
Board size, current rating, MOSFET grade, connector, sensing layout.
Firmware
Protection thresholds, SoC model, wake/sleep, pre-charge logic.
Communication
CAN DBC, RS485 register map, UART protocol, SMBus profile.
Mechanical
Standalone board, integrated PCM, enclosed smart module.
Validation
HIL test, pack-level aging, fault-injection reports.
Branding
Neutral, white-label or private-label.
Engineering & Quality Workflow
Requirement
Pack schematic, cell model, load profile, protocol.
1
>>
Proposal
BMS grade, topology, firmware scope, lead time.
2
>>
Sample
Board + pack joint test, telemetry verification.
3
>>
Validation
Real-load cycling, fault injection, thermal test.
4
>>
Production
SMT line, AOI, 200+ test points, batch records.
5
>>
Support
Firmware iteration, field data review, spare-board pool.
6
Protection
Over/under-voltage, over-current, short-circuit, over-temp, cell open detection.
Balancing
Passive standard; active optional for >100Ah / high-value packs.
Estimation
SoC, SoH, SOH, remaining runtime, internal resistance trend.
Diagnostics
Event logging, fault codes, black-box replay for warranty analysis.
Thermal
Multi-NTC, charge/discharge thermal strategy, pre-heat option.
Interface
Contactor drive, pre-charge, isolation monitoring (HV option).
Target Applications
🛵
E-Mobility (e-bike/scooter/moto)
🏌️
Golf Cart & Low-Speed EV
🤖
AGV / AMR / Service Robots
🚁
UAV / Drone Smart Packs
🔋
ESS / Solar Storage
🏭
Industrial Tools & Backup Power
Our Certificate

ISO 9001
ISO 9001
ISO 9001
FAQ
Q: Do you only sell the BMS board?
A: We can supply BMS-only, but most projects are co-designed with the pack - it gives better protection accuracy, thermal behavior and telemetry.
Q: Which communication protocol should I choose?
A: CAN 2.0B for EVs/robots, RS485/Modbus for ESS, UART/SMBus for compact devices. We help pick based on your controller.
Q: Can the BMS handle both NMC and LFP?
A: Yes - chemistry is firmware-selectable; thresholds, cell count and balancing are configured per project.
Q: What telemetry do I get?
A: Per-cell voltage, current, temperature, SoC, SoH, cycle count and fault log. DBC/register map provided under NDA.
Q: How do you validate the BMS?
A: Board-level 200+ test points plus pack-level aging, short-circuit and thermal-cycle tests with batch reports.
Q: What certifications are provided?
A: UN38.3 test summary and MSDS baseline. Additional market-specific documentation prepared per project.
Hot Tags: custom smart bms 1s 32s can rs485, battery management system, custom smart bms 1s 32s can rs485 manufacturer, custom smart bms 1s 32s can rs485 supplier, OEM battery, RYDBATT, bms in ev vehicle, 6 volt battery bms, low voltage bms, 4S BMS For Li Ion Battery, bms electronics, battery bms wiring

