Custom Battery Pack + Smart BMS Turnkey OEM

Custom Battery Pack + Smart BMS Turnkey OEM
Details:
RYDBATT turnkey custom lithium battery packs with in-house smart BMS — cell grading, PACK engineering, CAN/RS485 telemetry, firmware tuning and EOL testing. OEM/ODM from prototype to mass production for industrial, AGV, medical and mobility applications.
Send Inquiry
Description
Send Inquiry

 

51.2V 65Ah Lightweight LSV Battery

Custom Battery Pack + Smart BMS Platform

One Partner from Cell Selection to Validated, Connected, Shippable Battery Systems

The RYDBATT turnkey platform is not a catalogue battery with a protection board bolted on. We engineer the whole energy system: cell grading → mechanical PACK → in-house BMS firmware → communication stack → EOL validation - so your equipment gets a power source matched to its duty cycle, thermal envelope and backend.

✓ LFP / NMC / NCA / LTO  ✓ 3.2V–115V  ✓ CAN/RS485/UART
✓ Active/Passive Balance   ✓ Telemetry    ✓ UN38.3

 

 

 

Platform RYD-TURNKEY-PACK
Chemistry LiFePO4 / NMC / NCA / LTO (application-selected)
Voltage Range 3.2V to 115V (1S–32S+ configurable)
Capacity 0.5Ah – 400Ah+ (single module)
Cell Form 18650 / 21700 / prismatic / pouch
BMS In-house: protection + balancing + SoC/SoH + telemetry
Communication CAN 2.0B / RS485 / UART / SMBus / BLE optional
Telemetry Per-cell V, current, temp, SoC, SoH, cycle, fault log
Mechanical Shrink-wrap / injection / sheet-metal / IP67 aluminium
Thermal Natural / passive / liquid-ready; low-temp heating option
Protection OV/UV/OCP/SCP/OTP/open-wire/isolation monitoring
Testing Cell match → function → aging → vibration → thermal → seal
Compliance UN38.3 / MSDS baseline; additional docs per market
Supply Model Prototype → pilot → mass production, white/private label

 

Why Turnkey, Not "Battery + BMS"
 
.

One Accountability 

No finger-pointing between cell vendor, pack house and BMS firm.

 

Matched Behavior 

BMS thresholds tuned to actual cell grade and load curve.

 

Backend Ready 

CAN/RS485 data model delivered with the pack, not retrofitted.

 

Traceability 

cell lot → BMS fw → test record tied to every serial.

 

Target Vehicles

 

🤖
AGV / AMR / Service Robots

🏭
Industrial Equipment & Tools

🚑
Medical Devices

🔋
ESS / Solar Storage

🛵
E-Mobility & Light EV

🚁
UAV / Drone Smart Packs

Quality Infrastructure
 

Cell Lab 

Grading, impedance, thermal and calendar-life screening.

01

SMT & PACK 

Automated placement, laser weld, AOI, MES traceability.

02

Test Bay 

200+ test points, thermal chamber, vibration, IP verification.

03

EOL 

Every pack cycles and reports before shipment.

04

Project Workflow

 

Phase Deliverable Typical Lead Time
1. Scoping Requirement review: voltage, load, thermal, envelope, protocol 1–3 days
2. Design 3D CAD, electrical schematic, BMS config, DFM sign-off 7–14 days
3. Prototype Functional sample + EOL report + protocol doc 15–25 days
4. Pilot Small batch validation in real equipment 20–30 days
5. Production Automated line, 100% test records, shipping docs 30–45 days

 

Customisation Dimensions

Electrical
Voltage, capacity, C-rate, charge curve, BMS thresholds.

1

>>

Mechanical
 Size, weight, mount, enclosure material, IP grade.

2

>>

Connectivity 
Connector, harness, CAN DBC, RS485 map, UART frame.

3

>>

Firmware 
SoC model, wake/sleep, pre-charge, thermal strategy.

4

>>

Branding  Neutral, white-label or private-label.

5

>>

Compliance  UN38.3/MSDS baseline; market-specific docs per project.

6

 
What We Engineer
 
01/

Cell Stage 
Capacity/IR grading, ΔV matching, lot consistency screening.

02/

PACK Stage 
Series-parallel topology, busbar, welding, enclosure, IP rating.

03/

BMS Stage 
Hardware + firmware: protection, balancing, SoC algorithm, protocols.

04/

Software Stage
DBC/register map, telemetry fields, OTA-ready architecture.

05/

Validation
Aging, thermal cycle, vibration, short-circuit, EOL per unit.

06/

Logistics
UN38.3 shipping, SoC-limited transport, batch documentation.

 

84000 Facility
Why RYDBATT

✅ Since 2005 - 20+ years lithium system integration.
✅ Vertical - cell grading, BMS, PACK, firmware, EOL in-house.
✅ Cross-domain - mobility, robot, industrial, medical, ESS.
✅ Scale - prototype 10 pcs to 50k+ monthly.
✅ Export - UN38.3/MSDS, DG freight documentation.
✅ NDA - schematic/protocol exchange under confidentiality.

 

FAQ

Q: Do I need to provide a complete specification?

A: No. Send your equipment load profile, envelope and target runtime; we propose topology, BMS and chemistry.

Q: Can you match our existing communication protocol?

A: Yes - CAN DBC, RS485 register map or UART frame. We align BMS output to your controller or inverter.

Q: What is the minimum prototype quantity?

A: Typically 5–50 pcs for validation, depending on build complexity.

Q: How do you ensure pack-to-pack consistency?

A: Cell grading by capacity/IR, automated welding, and 100% EOL test with serial-level records.

Q: What certifications are provided?

A: UN38.3 test summary and MSDS baseline. Additional market docs prepared per project scope.

Q: Do you only build batteries, or also BMS?

A: Both - BMS hardware and firmware are developed in-house and tuned to the pack.

Hot Tags: custom battery pack smart bms turnkey oem, battery management system, custom battery pack smart bms turnkey oem manufacturer, custom battery pack smart bms turnkey oem supplier, OEM battery, RYDBATT, 4S BMS For Li Ion Battery, energy bms, pack bms, ev bms system, mini bms system, bms controller battery

Send Inquiry