50.4V 20.8Ah Li-ion Pack

50.4V 20.8Ah Li-ion Pack
Details:
RYDBATT 50.4V 20.8Ah 14S8P Li-ion pack. 50A continuous, 300+ cycles, smart PCM, CAN/RS485 optional. For industrial LEV, AGV & high-rate equipment. OEM/ODM.
Send Inquiry
Description
Send Inquiry

 

50.4V 20.8Ah 14S High-Rate Li-ion Battery Platform

50.4V 20.8Ah 14S High-Rate Li-ion Battery Platform

~1.05kWh Power Pack for Industrial LEV, AGV & High-Drain Equipment

The RYDBATT RYD-HP504208 is a 50.4V 20.8Ah lithium-ion power pack built on a 14S8P architecture, delivering 50A continuous discharge for high-rate industrial loads. It is engineered as a drop-in power platform for light utility vehicles, AGV/AMR, floor equipment and portable high-drain devices - where sustained current, pack consistency and communication-ready protection matter more than consumer styling.

✓ 14S8P  ✓ ~1.05kWh  ✓ 50A Cont.  ✓ Smart PCM
✓ 300+ Cycles                ✓ CAN/RS485

 

 

Model RYD-HP504208
Chemistry Li-ion (NMC/NCA cylindrical, grade A)
Configuration 14S8P (112 cells)
Nominal Voltage 50.4V (58.8V charge / 39V cutoff)
Capacity 20.8Ah (nominal)
Energy ≈1.05kWh
Continuous Discharge 50A
Peak Discharge Configurable per project load profile
Charge Current Standard 0.2C–0.5C, custom charge profile
Protection PCM: OV/UV/OCP/SCP/OTP + balancing
Communication CAN / RS485 / UART optional
Enclosure Aluminum/ABS, custom footprint & mounting
Dimensions / Weight Customizable to host equipment bay
Cycle Life 300+ cycles @ 25°C (application-dependent)
Operating Temp. Charge 10–45°C / Discharge -20–60°C
Compliance UN38.3 / MSDS baseline; CE/RoHS per market
Supply Model Sample -> pilot -> volume OEM/ODM

 

Why Equipment Buyers Specify RYD-HP504208

 

High-Rate Headroom

50A continuous built for acceleration, lifting and surge loads, not just steady cruise.

14S8P Consistency

112-cell matching with IR grading and formation for balanced aging across the pack.

Communication Ready

CAN/RS485 telemetry for SOC, fault flags and fleet battery health monitoring.

Thermal Margin

Wide operating range with OTP and thermal-managed enclosure options.

Drop-in Engineering

Voltage window, connectors and BMS tuned to your controller, not a generic pack.

Reproducible Supply

Cell PN control, BMS firmware lock, batch traceability for rolling production.

 

Target Applications

 

🛠️
Industrial LEV & Utility Carts

🤖
AGV / AMR Platforms

🧹
Floor Scrubbers & Cleaning Robots

🏭
Automated Handling Equipment

🚀
High-Rate Portable Power Units

🔋
Commercial Light E-Mobility Fleets

Customization Scope

 

Electrical

Continuous/peak current, charge profile, low-temp charge lockout.

Mechanical

Enclosure size, mounting, IP rating, heatsink integration.

BMS

Protection thresholds, balancing strategy, CAN/RS485 protocol matrix.

Interface

Connector type, harness length, charge/discharge separation.

Software

SOC algorithm, telemetry, remote diagnostics.

Branding

Neutral / white-label / private label, serialization, carton & manual.

Quality & Validation

 

Stage Control Point
Cell incoming Capacity & IR grading, OCV matching per parallel group
PCM/BMS OV/UV/OCP/SCP/OTP threshold verification + balancing
Assembly Busbar weld check, insulation resistance, torque control
Formation Full charge/discharge cycle before release
Load test 50A continuous + peak surge validation per load profile
Reliability Vibration, thermal cycle, drop test
Traceability Serial -> cell lot -> BMS fw -> test report
OEM / ODM Engagement

 

Load Brief - voltage window, continuous/peak A, runtime, charger spec.

1

>>

Proposal - 14S config, cell grade, BMS current, enclosure, protocol.

2

>>

Sample - bench + on-machine validation, 15-25 working days.

3

>>

Pilot - small batch, consistency & EMS joint debugging.

4

>>

Mass - 30-45 days, full docs, DG packaging, freight support.

5

>>

Support - warranty framework, spare PCM, depot-level diagnostics.

6

 

Procurement FAQ

Q: Is this just a scooter battery?

A: No. It is a 14S high-rate Li-ion platform for industrial equipment and commercial LEV fleets, not a consumer scooter accessory.

Q: How is it different from the 50.4V 18.2Ah page?

A: 18.2Ah page targets fleet commuter packs; this 20.8Ah platform targets higher sustained current and industrial duty cycles.

Q: Can the BMS talk to our controller?

A: Yes. CAN/RS485/UART configurable; we joint-debug the protocol at sample stage against your equipment.

Q: What load can 50A support?

A: Roughly 2.5kW continuous at pack voltage. Peak and duration are tuned to your acceleration/lift profile.

Q: What documents ship with bulk orders?

A: UN38.3 test summary and MSDS baseline. CE/RoHS/REACH packs issued against your target market.

Q: What is MOQ and lead time?

A: Sample orders accepted; pilot and mass MOQ project-based. Typical mass lead time 30-45 working days.

Hot Tags: 50.4v 20.8ah li-ion pack, electric scooter battery, 50.4v 20.8ah li-ion pack manufacturer, 50.4v 20.8ah li-ion pack supplier, OEM battery, RYDBATT, battery wali scooty ke price, ev scooter battery price, 36V 7.8 Ah Lithium Battery, battery scooter battery price, all battery scooty, 36V 10ah Ebike Battery

Send Inquiry