
Custom Lithium-ion Battery Pack Engineering (OEM/ODM)
RYDBATT is a direct lithium battery pack manufacturer for procurement teams who need more than a catalog SKU. We engineer 12V–72V custom Li-ion and LiFePO4 packs - from cell grading and BMS logic to enclosure, communication protocol and export documentation - under one accountable engineering team.
✓ 12V–72V Platform ✓ Li-ion / LiFePO4 ✓ In-house BMS
✓ CAN / RS485 ✓ Cell Grading ✓ UN38.3 Ready
What We Engineer
Voltage Matrix
12V / 24V / 36V / 48V / 52V / 60V / 72V, 3S to 24S architecture.
Cell Formats
18650, 21700, 32700, prismatic, pouch; graded by capacity/IR/OCV.
BMS Layer
Protection, balancing, SOC/SOH, thermal cutoff, CAN/RS485 telemetry.
PACK Structure
Bracket, busbar, thermal path, IP-rated enclosure, custom harness.
order management
Communication - CAN 2.0B, RS485/Modbus, UART; protocol map delivered with samples.
Compliance
UN38.3/MSDS baseline; CE/RoHS/IEC/UL per market.
Customization Dimensions
| Dimension | Options RYDBATT Configures |
|---|---|
| Electrical | Voltage, capacity, C-rate, peak current, charge profile, BMS thresholds |
| Chemistry | Li-ion (NMC/NCA) for energy density; LiFePO4 for safety & cycle life |
| Mechanical | Dimensions, mounting, IP rating, weight target, thermal strategy |
| Interface | Connectors, cable length/direction, communication port |
| Software | BMS firmware, CAN DBC, RS485 register map, optional GPS/telemetry |
| Branding | White-label / private-label, label, manual, carton, barcode rules |
Reference Build (Case Module)
| Item | Spec |
|---|---|
| Configuration | 14S9P Li-ion, 52V class |
| Capacity | 23.4Ah (reference) |
| Application | Light EV / e-scooter / e-bike platform |
| BMS | Smart BMS with balancing, thermal sensing, customizable protocol |
| Enclosure | Custom aluminum/PC-ABS, project-defined dimensions |
| Note | Reference only - final spec re-engineered per project, not a fixed SKU |



Industries We Serve
🛴
E-bike / E-scooter / E-moto
🤖
AGV / AMR / Robots
🏗️
Forklift / Industrial Vehicle
🛠️
Power Tools
🔋
ESS / Backup Power
🚤
Marine / RV
🚁
Drones / UAV
🏥
Medical & Instrument
OEM / ODM Workflow
Requirement & load profile
1
>>
Cell + BMS topology design
2
>>
Mechanical & thermal DFM
3
>>
Prototype + test report
4
>>
Pilot / field validation
5
>>
Mass production & docs
6
Quality Controls Procurement Can Audit
| Stage | Control Point |
|---|---|
| Cell incoming | Capacity / IR / OCV grading, batch consistency |
| BMS | Protection threshold, balancing, protocol loopback test |
| PACK | Torque, insulation, weld quality, thermal path check |
| EOL | Full charge/discharge, communication, thermal scan |
| Docs | Datasheet, test report, UN38.3/MSDS, register map |
| Traceability | Serial → cell lot → BMS fw → EOL record |
Our Certificate

ISO 9001:2015
ISO 9001:2015
ISO 9001:2015
Procurement FAQ
Q: What info do you need for a quote?
A: Application, voltage, capacity, continuous/peak current, size limit, connector, communication protocol, environment and annual volume.
Q: Can you match our existing BMS protocol?
A: Yes. We adapt CAN/RS485 to your motor controller or charger and provide the register map during prototyping.
Q: Do you use branded cells?
A: We select cells per project and define grading standards in writing - capacity, IR and OCV consistency are documented per batch.
Q: What is the prototype lead time?
A: Typical functional prototype in 7–15 working days after spec confirmation; mass production 30–45 days.
Q: Which certifications are included?
A: UN38.3 + MSDS baseline; CE/RoHS/IEC/UL supported per target market.
Q: Is this a trading company?
A: No. RYDBATT is manufactured by Shenzhen Ryder Electronics with its own Huizhou production base.
Hot Tags: custom li-ion pack oem, energy storage battery, custom li-ion pack oem manufacturer, custom li-ion pack oem supplier, OEM battery, RYDBATT, pv storage battery, cheapest battery storage, energy arbitrage battery storage, stationary battery storage, 200kw battery storage, li ion battery storage

