
Residential LiFePO4 Energy Storage Battery Modules (OEM/ODM)
The RYDBATT residential ESS platform delivers modular 48V/51.2V LiFePO4 battery modules from 5kWh to 20kWh, engineered for home solar storage, backup power and off-grid systems. Built for distributors, installers and solar integrators who need inverter-compatible battery racks with documented BMS communication - not a closed consumer box.
✓ LiFePO4 Prismatic ✓ 48V / 51.2V ✓ 5–20kWh Modular
✓ CAN / RS485 ✓ Wall & Rack ✓ 6000+ Cycles
Core Specifications (Module Level)
| Chemistry | LiFePO4 (LFP), prismatic |
|---|---|
| Nominal Voltage | 51.2V (16S) |
| Capacity Range | 100Ah – 400Ah (5–20kWh) |
| Cycle Life | ≥6000 cycles @ 80% DoD |
| Max Continuous Discharge | 50A / 100A / 150A (model dependent) |
| BMS | 16S smart BMS, balancing, SoC/SoH, thermal sensing |
| Communication | CAN bus + RS485 (Modbus), protocol mapping per inverter |
| Enclosure | Metal shell, IP21 indoor / IP65 optional, wall or rack mount |
| Operating Temp | Charge 0–45°C / Discharge -20–60°C |
| Safety | Contactor, fuse, pre-charge, isolation monitor |
| Compliance | UN38.3 / MSDS baseline; CE/RoHS/IEC/UL per market |
| Warranty | 10-year performance framework (project-based) |
Typical Configurations
| Model Class | Voltage | Capacity | Energy | Form | Use Case |
|---|---|---|---|---|---|
| RYD-ESS-5K | 51.2V | 100Ah | 5.12kWh | Wall-mount | Small home / apartment backup |
| RYD-ESS-10K | 51.2V | 200Ah | 10.24kWh | Wall / Rack | Standard residential solar storage |
| RYD-ESS-15K | 51.2V | 300Ah | 15.36kWh | Rack | High-consumption villa / farmhouse |
| RYD-ESS-20K | 51.2V | 400Ah | 20.48kWh | Stackable Rack | Off-grid / peak-shift projects |
Platform Architecture
Cell Layer
Grade-A prismatic LiFePO4, capacity/IR grading, matched batches for parallel expansion.
Module Layer
48V/51.2V packs in wall-mount or rack form, IP-rated enclosures, built-in fuses & contactors.
BMS Layer
Stack-current monitoring, cell balancing, SoC/SoH, thermal cutoff, CAN/RS485 telemetry.
System Layer
Parallel up to N modules, compatible with hybrid inverters via configurable protocol.
Safety Layer
Over-charge/discharge, short-circuit, overtemperature, isolation monitoring.
Service Layer
Datasheet, register map, installation drawing, cert package per market.
Application Scenarios
🏠
Residential Solar Storage
🔌
Backup Power / UPS
🌄
Off-grid & Hybrid Homes
⚡
Peak Shaving & TOU Arbitrage
🏕️
Remote Cabin & Farm
🏢
Small Commercial ESS
OEM / ODM Customization
Electrical
Capacity, C-rate, BMS thresholds, inverter protocol (Deye/Sofar/Growatt-class register sets).
Mechanical
Wall/rack/stack form, dimensions, color, IP rating, mount kit.
Branding
Private label, LCD/LED UI, manual, carton, barcode & serial rules.
Software
BMS firmware, CAN DBC, RS485 map, remote monitoring option.
Certification
UN38.3/MSDS baseline; CE/IEC/UL support by destination.
Logistics
DG packaging, SoC-limited transport, batch docs, freight coordination.
Project Workflow
Load profile & inverter brand
1
>>
Topology & enclosure design
2
>>
Prototype + protocol debug
3
>>
Pilot installation
4
>>
Mass production (30–45 d)
5
>>
After-sales & spare BMS
6
Quality & Compliance
| tage | Control |
|---|---|
| Cell incoming | Capacity/IR grading, batch consistency test |
| BMS | Protocol loopback, balancing, protection threshold verification |
| Assembly | Torque, insulation resistance, contactor function test |
| EOL | Full charge/discharge, communication test, thermal scan |
| Docs | Datasheet, register map, test report, UN38.3/SDS |
| Traceability | Serial → cell lot → BMS fw → EOL record |
FAQ
Q: Is this a portable power station?
A: No. This is a residential battery module platform for fixed solar/storage installation, not a consumer portable unit.
Q: Which inverters are supported?
A: CAN/RS485 BMS is configurable to mainstream hybrid inverters; we deliver the protocol map during prototype stage.
Q: Can modules be paralleled?
A: Yes. Same-model modules support parallel expansion with managed current sharing.
Q: What certifications ship with bulk orders?
A: UN38.3 + MSDS baseline; CE/IEC/UL issued per target market on request.
Q: What is MOQ and lead time?
A: Project-based. Samples/pilot supported; mass production typically 30–45 working days.
Q: Do you provide installer documentation?
A: Yes - datasheet, wiring diagram, BMS register map, installation manual and safety file.
Hot Tags: home ess battery modules, energy storage battery, home ess battery modules manufacturer, home ess battery modules supplier, OEM battery, RYDBATT, virtual battery storage, 1 mw battery storage cost, grid scale battery storage cost, heat battery storage, energy storage, battery storage cost


