Built for 1,000W-3,000W electric motorcycles, high-speed e-bikes and delivery fleets.
180 grade-A high-energy-density Li-ion 18650 cells in a 20S9P layout, 80A continuous discharge, CAN bus telemetry and an IP67 sealed metal enclosure -
factory-direct power for OEM programs.

72V
NOMINAL (20s)
20Ah
RATED / 22AH NOMINAL
1,440Wh
TOTAL ENERGY
80A
CONTINUOUS / 90A BURST
WHY SPEC THIS PACK
Engineered for Current Headroom, Not Just Capacity
80A Continuous Discharge
Feeds a 3,000W motor (≈42A full load) with nearly double the headroom - 90A ±9A burst covers 5,000W-peak start-
up surges.
20Ah Rated Long Range
1,440Wh at rated capacity returns 60–75 km of mixed urban riding, or 90-115 km at economy speeds.
20S9P Cell Architecture
180 × 2,500mAh grade-A 18650 cells: 20 series for voltage,
9 parallel so each cell carries only ≈8.9A at full load.
IP67 Sealed Metal Case
Sealed enclosure rated against dust, moisture and road debris - built for year-round street duty.
Smart BMS + CAN Bus
Full protection suite with CAN 2.0B telemetry: real-time voltage, temperature and SOC reporting to your ECU.
Compliance Ready
UL-listed materials, UN38.3, IEC 62133, CE and RoHS documentation supported for US and EU programs.
Twenty cell groups in series set the 72V nominal system voltage; nine groups in parallel share the load, so at 80A continuous every cell works at only ≈8.9A. Every cell is graded for capacity and internal resistance, then matched and welded group by group.
72V nominal - the high-power 20S platform
20Ah rated /22Ah nominal - 9 parallel groups x 2,500mAh each
180 grade-A 18650 cells - sorted, matched and inspected
82V charge / 56V cut-off - safe window enforced by BMS

82V Charging, Deliberately
The pack charges to 82V - 4.10V per cell instead of the usual 4.20V. That lower cut-
off gives up a little capacity but slows capacity fade, extending service life. Standard charge is about 5 hours; 10A fast charge returns about 2 hours.
CHARGE CUT-OFF
MAX CHARGE CURRENT
NOMINAL VOLTAGE
DISCHARGE CUT-OFF
Motor and Controller Matching
This is where a 72V 22Ah lithium battery separates itself from everything else in its size class:
| Motor Power | Full-load Current @ 72V | This Pack (80A continuous) | Typical 22Ah Competitor (22A) |
|---|---|---|---|
| 1,000W | ~14A | Ample headroom | Adequate |
| 2,000W | ~28A | Comfortable | At the limit |
| 3,000W | ~42A | Works, with margin | Over its rating |
| 5,000W peak | ~70A | Inside the 90A burst window | Not viable |
Tell us your controller's amp rating when ordering. The protection board holds 90A ±9A for 15–25 seconds before stepping down, so a 5,000W peak motor drawing about 70A stays inside that window. Sustained loads belong on a larger pack: if you run a 3,000W motor flat-out for long stretches, ask about the 72V 32Ah electric motorcycle battery instead - same 20S platform, more energy behind the same current.
72V 20Ah 20S9P-Full Data
|
Parameter |
Specification |
|
Nominal Voltage |
72V (20S, 20 cells in series) |
|
Nominal Capacity |
22Ah (model designation: 9 parallel groups of 2,500mAh cells) |
|
Rated Capacity |
20Ah typical @ 0.2C, 25 ±2°C |
|
Minimum Capacity |
19.5Ah @ 0.2C - 97.5% of rated capacity |
|
Energy |
1,584Wh nominal / 1,440Wh at rated capacity |
|
Cell Configuration |
20S9P, 180 × grade-A high-energy-density 18650 cells |
|
Charge Cut-off Voltage |
82V (4.10V per cell) |
|
Discharge Cut-off Voltage |
56V (2.80V per cell) |
|
Max Continuous Discharge |
80A (≈8.9A per cell) |
|
Peak Discharge |
90A ±9A for 15–25 s before step-down |
|
Charge Current |
0.2C standard (≈4A); 10A max; trips at 15A ±1A |
|
Dimensions (L × W × H) |
362 ±2 × 210 ±1 × 130 ±1 mm |
|
Weight |
12kg ±0.5kg |
|
Cycle Life |
≥500 cycles @80% (rated); ≥800 cycles to 60% at 0.5C discharge |
|
Operating Temperature |
Discharge: -15°C to 60°C / Charge: 10°C to 45°C |
|
IP Rating |
IP67 (dust-tight, water-jet protected) |
|
Communication |
CAN bus (2.0B) - real-time voltage, temperature, SOC telemetry |
|
Certification |
UL-listed materials & CAN module; UN38.3 / IEC 62133 / CE / RoHS / MSDS supported |
|
Warranty |
12 months or 500 cycles from delivery |
|
MOQ |
50 pcs |
OEM/ODM Customization
We build to your controller, not to a generic datasheet. Selectable on this platform:
- Capacity: 20.8Ah, 22Ah, 27.5Ah, 32Ah, 40Ah and 50Ah, all on the 20S architecture
- Cell brand and chemistry: 18650 or 21700, brand nominated by you
- Protection board: 40A to 150A continuous, with or without CAN
- Charge profile: the standard 82V profile, or a different cut-off matched to your controller
- Customer-specified / custom-matched to your system interface
- Case: sealed metal or injection-moulded, custom mounting pattern
- Label and packaging: your brand artwork; export carton to your carrier's requirements
Send your frame drawing and controller specification and we will issue a dimensioned drawing for approval before tooling begins.
FAQ
Q: How far can a 72V 20Ah electric motorcycle battery take me?
A: About 60–75 km of mixed urban riding at 40–55 km/h, or 90–115 km if you ride economically below 35 km/h. Aggressive riding, hills, or heavy loads bring it down to 40–50 km. The pack holds 1,440Wh at rated capacity (1,584Wh nominal), and e-motorcycles consume 30–45 Wh per mile in mixed conditions.
Q: What size motor can a 72V 20Ah battery run?
A: Up to about 3,000W continuously. A 3,000W motor at 72V draws roughly 42A at full load against an 80A continuous rating - nearly double the headroom the motor needs. For short bursts the BMS tolerates 90A ±9A for up to 15–25 s, covering a 5,000W peak motor pulling about 70A.
Q: Why does the specification say 20Ah when the model says 22Ah?
A: Two measurements, both correct. 22Ah is the model designation, taken from nine parallel groups of 2,500mAh cells giving 22.5Ah at a 4.20V charge. 20Ah is the rated capacity measured at pack level, guaranteed to a 19.5Ah minimum. We publish both because a pack charged to 4.10V per cell holds less than at 4.20V - and that lower cut-off extends pack life.
Q: What is 20S9P and does it matter?
A: 20 cells in series set the 72V nominal; 9 parallel groups spread load across more cells. That 9P arrangement is why this pack carries 80A instead of
22A - at 80A each cell carries only ≈8.9A. A 20S6P pack at the same current would load every cell at 13.3A, running hotter and aging faster.
Q: Does this 72V battery have CAN communication?
A: Yes. The YH068 platform includes CAN 2.0B bus communication for real-time voltage, temperature, and SOC telemetry to your ECU/VCU and diagnostic tools - valuable for fleet analytics and service visibility.
Q: How long does it take to charge?
A: About 5 hours at the standard 0.2C rate (≈4A), or about 2 hours at the 10A maximum. An 82.4V CC/CV charger is used; do not exceed 10A - the protection board limits continuous charging to 10A and trips at 15A ±1A.
Q: Is the pack waterproof and certified?
A: The sealed enclosure is IP67-rated, and the platform uses UL-listed materials with UN38.3 / IEC 62133 / CE / RoHS / MSDS documentation supported for US and EU import.
Hot Tags: 72v 20ah 20s9p lithium battery pack, electric motorcycle battery, 72v 20ah 20s9p lithium battery pack manufacturer, 72v 20ah 20s9p lithium battery pack supplier, OEM battery, RYDBATT, battery wali gadi motorcycle, 72V 27.5Ah Lithium Ion Battery, 60V Electric Motorcycle Lithium Battery, motorcycle battery wattage, motorbike battery pack, charging bike battery price

