
20S 72V High-Rate Li-ion Powertrain Module
OEM/ODM High-Power Platform for High-Performance E-Motorcycle, Delivery Fleets & Commercial Light EV
The RYDBATT RYD-7200-HR is a 20S lithium-ion powertrain platform engineered for high-rate discharge, not just capacity. With 80A continuous / 90A peak output, CAN 2.0B telemetry and temperature-adaptive charge management, it powers 3,000–5,000W motors in performance e-motorcycles, commercial delivery vehicles and rugged off-road light EV platforms. The same architecture scales from 20.8Ah to 50Ah - one communication stack, one mechanical envelope, multiple energy grades.
✓ 20S Platform ✓ 80A Cont. ✓ CAN 2.0B ✓ Thermal-Managed
✓ IP67 ✓ 3–5kW Ready
| Platform Architecture | 20S Li-ion (72V nominal, 82V charge cut-off) |
|---|---|
| Capacity Options | 20.8 / 22 / 27.5 / 32 / 40 / 50Ah (20S9P / 20S6P / custom) |
| Energy Range | 1.5–3.6kWh per module |
| Max Continuous Discharge | 80A (peak 90A ±9A, 15–25s configurable) |
| Motor Compatibility | 3,000W continuous / 5,000W peak (72V-class hub & mid-drive) |
| Charge Current | 0.2C standard, up to 10A (temp-adaptive) |
| BMS / PCM | Smart PCM: OVP/OCP/SCP/OTP + cell balancing |
| Communication | CAN 2.0B - SOC, voltage, temperature, fault codes (DBC provided) |
| Thermal Management | Charge current derating below 10℃; cutoff at 68℃ discharge / 50℃ charge |
| Cell Format | 18650 / 21700 cylindrical, grade-A cells (brand per customer spec) |
| Connectors | M23 2+1+5-pin charge / M25 high-current discharge (customizable) |
| Ingress Protection | IP67 sealed enclosure |
| Cycle Life | ≥500 cycles (60% retention @0.5C, typical 22Ah config) |
| Operating Temp. | Discharge -15–60℃ / Charge 10–45℃ (adaptive) |
| Compliance | UN38.3 / MSDS baseline; CE/RoHS/UL docs per project |
| Warranty | 12 months or 500 cycles (project terms negotiable) |
Why a High-Rate Platform, Not Just "High Capacity"
80A Sustained Output
No voltage sag under hard acceleration, hill climbs or heavy payload.
CAN 2.0B Telemetry
ECU/VCU reads SOC, cell temp, current and DTCs in real time; fleet-ready.
Thermal-Adaptive Charging
Current auto-derates in cold/heat; protects cells, extends life.
One Platform, Many SKUs
Same 20S stack scales 20.8→50Ah without redesigning comms or mounting.
BMS & Protection
| Protection Layers | Over-charge / over-discharge / charge-overcurrent / discharge-overcurrent / short-circuit / over-temp / under-temp / cell balancing |
|---|---|
| Discharge Stages | 35A / 70A / 168A three-stage over-current response |
| Thermal Cutoff | Discharge ≥68℃ cut / 55℃ recover; Charge ≥50℃ cut / 43℃ recover |
| Communication | CAN 2.0B, register map / DBC delivered with sample |
| Cold-Charge Logic | 6A@5–10℃ / 9A@10–15℃ / 12A@15–25℃ / 15A@25–45℃ |
Target Applications
🏍️
High-Performance E-Motorcycles
🛵
Commercial Delivery Fleets
🏜️
Off-Road & Trail Light EV
🏁
Race / Tuning / Swap Platforms
📦
Cargo E-Bikes & 3-Wheelers
🤖
High-Power AGV & Utility Vehicles
OEM / ODM Customisation
Electrical
Capacity grade, continuous/peak current, BMS threshold, SOC algorithm.
Communication
CAN 2.0B (DBC provided), optional RS485/UART.
Mechanical
Enclosure size/shape, mounting pattern, weight target, IP rating.
Connector
M23/M25, XT90, Anderson, or customer-specified harness.
Thermal
Passive or active thermal management for high C-rate duty.
Branding
Neutral, white-label or private label, label/package to carrier spec.
Quality & Validation
Cell Grading
Capacity, IR and voltage matching before PACK.
PCM Test
Protection, recovery, balancing and CAN telemetry verified per unit.
Load Simulation
Acceleration, regen and thermal cycling under simulated duty.
Environment
IP67 sealing, vibration, drop and thermal shock per batch.
Transport
Shipped at partial SOC; UN38.3/MSDS docs provided.
Traceability
Outgoing test report + BMS config file per pack.

Why RYDBATT
✅ 20+ Years lithium system integration since 2005.
✅ In-House BMS - CAN stack, thermal logic and protection developed internally.
✅ Cell-to-Pack QC - grading, formation, aging, full inspection.
✅ Platform Scale - samples to volume production for vehicle OEMs.
✅ Export Ready - documentation for global air/sea freight.
✅ Confidential - NDA before drawing/BMS register exchange.
Procurement Info
| MOQ | Project-based; platform samples available for validation |
|---|---|
| Lead Time | 20 days for samples; 30–45 days for volume (confirm by qty) |
| Payment | 30% T/T deposit + 70% before shipment |
| Shipping | FOB / CIF / DDP / DDU available |
| Packaging | Custom carton, SOC 30–50%, anti-short-circuit terminals |
Frequently Asked Questions
Q: Is this the same as the 72V 22Ah page?
A: No. The 22Ah page is the specific capacity SKU. This is the 20S high-rate platform page - covering 20.8–50Ah variants, BMS communication and thermal strategy for vehicle integrators. Old 72v-high-capacity-battery.html should 301-redirect here.
Q: What motor power can 80A support?
A: 72V × 80A ≈ 5.76kW continuous headroom. Comfortably runs 3,000W continuous / 5,000W peak motors with margin.
Q: Does it support regen?
A: CAN BMS supports regen coordination with the controller; regen ceiling and cut-off are configurable in firmware.
Q: Can I use it in cold regions?
A: Yes. Charge current auto-derates below 10℃; discharge works to -15℃. Heated version available for sub-zero markets.
Q: What certifications are provided?
A: UN38.3 and MSDS baseline. CE/RoHS/UL/IEC documentation prepared per project and target market.
Q: How do I start an OEM project?
A: Send controller spec + frame drawing; we return a dimensioned proposal, BOM options and CAN DBC before tooling.
Hot Tags: 20s 72v high-rate li-ion module 80a can, electric motorcycle battery, 20s 72v high-rate li-ion module 80a can manufacturer, 20s 72v high-rate li-ion module 80a can supplier, OEM battery, RYDBATT, 72V 27.5Ah Lithium Ion Battery, battery per chalne wali motorcycle, swappable battery, electric motorcycle battery, battery race bike, battery motorcycle price

