25.2V 10Ah 7S3P 18650 Lithium-Ion Battery Pack

25.2V 10Ah 7S3P 18650 Lithium-Ion Battery Pack
Details:
Explore RYDBATT’s 25.2V 10Ah 7S3P 18650 lithium-ion battery pack. Review key specifications and contact our team to discuss battery pack fit, BMS requirements and OEM/ODM project needs.
Send Inquiry
Description
Send Inquiry

 

product-768-512

25.2V 10Ah 7S3P 18650 Lithium-Ion Battery Pack

Specification-led rechargeable power source for equipment engineering and procurement teams

The RYDBATT 25.2V 10Ah lithium-ion battery pack is built around a 7S3P 18650 cell configuration for equipment projects that require a compact, rechargeable power source. With a nominal voltage of 25.2V and a rated capacity of 10Ah, this battery pack gives product engineers and purchasing teams a defined electrical platform to evaluate against their device requirements.

Before placing an order, confirm the operating voltage range, continuous current demand, connector, enclosure space, charging profile and protection requirements of your equipment. RYDBATT can review project requirements with your team to determine whether this configuration is suitable and whether a customised battery-pack solution is needed.

✓ 25.2V 10Ah  ✓ 7S3P 18650  ✓ 20A Continuous  ✓ 252Wh
✓ OEM/ODM Ready

 

 

Product type Rechargeable lithium-ion battery pack
Brand RYDBATT
Nominal voltage 25.2V
Rated capacity 10Ah
Energy ≈252Wh
Cell format 18650 cylindrical lithium-ion cells
Pack configuration 7S3P (7 cells/groups in series, 3 in parallel)
Model number 8177180703006
Dimensions (L×W×H) 247 × 123 × 46.5 mm (±1mm)
Approximate weight 1,800 g
Charge cut-off voltage 29.4V
Discharge cut-off voltage 19.25V
Max continuous discharge current 20A
Max charging current ≤15A (standard ≤5.25A)
Internal impedance ≤120 mΩ
Stated standard GB/T 18287-2013 (as listed in current product specification)

 

 

Designed for Specification-Led Equipment Projects

 

For procurement teams, battery selection starts with electrical and mechanical fit - not just voltage and capacity. Use the specification table above to screen this 7S3P pack against your equipment design, then confirm the details below with your engineering team.
 

  • Voltage compatibility: confirm the device's acceptable operating voltage range and charging cut-off requirement.
  • Load profile: compare the device's normal and peak current demand with the pack's rated limits.
  • Mechanical fit: verify the available installation space against the listed dimensions and required cable clearance.
  • Connection requirements: confirm connector type, wire length, polarity and charge/discharge port arrangement before ordering.
  • Protection requirements: check the required protection functions and whether the current configuration meets the target application's safety requirements.
  • Procurement requirements: confirm forecast quantity, sample needs, target delivery schedule, documentation and any customisation scope.
7S3P 18650 Configuration Explained
 

7S = 7 series groups

determines the pack's nominal voltage platform (25.2V).

 

3P = 3 parallel cells per group

contributes to available capacity and current capability, subject to cell and pack design limits.

 

18650 format

cylindrical lithium-ion cells, widely used in industrial equipment battery systems.

 

Application fit

suitable for equipment with matched 25.2V nominal input and defined load profiles; compatibility must be confirmed per project.

 

 

OEM/ODM Battery Pack Enquiries
 

If your project requires a different connector, cable arrangement, enclosure, protection setup or electrical specification, send RYDBATT your equipment requirements for review. Customisation feasibility, minimum order quantity, sample availability, lead time and production terms should be confirmed for each project rather than assumed.

Target equipment

- intended application and operating environment.

Electrical spec

- nominal voltage, capacity and continuous/peak current.

Mechanical spec

- maximum battery dimensions and mounting details.

Connection spec

- connector, cable and charging requirements.

Commercial spec

- estimated annual volume and initial order quantity.

Compliance spec

- required certifications, test reports and target sales markets.

Frequently Asked Questions
 
 

Q: Is this a 24V battery or a 25.2V battery?

A: Its listed nominal voltage is 25.2V. Some buyers use "24V-class" to describe equipment categories, but compatibility depends on the equipment's actual voltage range and charger requirements. Confirm these before ordering.

Q: What does 7S3P mean?

A: 7S3P means seven series-connected groups with three cells in parallel per group. It describes the battery's internal cell configuration.

Q: What is the rated capacity?

A: The listed rated capacity is 10Ah. Actual runtime depends on the device's power draw, operating conditions, cut-off settings and battery condition.

Q: What is the maximum continuous discharge current?

A: The current product specification lists a maximum continuous discharge current of 20A. Confirm that the equipment's continuous and peak current requirements are compatible.

Q: Can RYDBATT customise this battery pack for OEM projects?

A: Send your voltage, capacity, current, dimensions, connector and protection requirements to the RYDBATT team. The available customisation scope, MOQ and lead time must be confirmed for your project.

Q: Can this battery be used in an electric motorcycle?

A: Do not assume compatibility based on the category name alone. The pack is listed at 25.2V nominal; confirm the vehicle's electrical architecture, required current, enclosure and charging system with the vehicle or battery engineering team.

 

Hot Tags: 25.2v 10ah 7s3p 18650 lithium-ion battery pack, electric motorcycle battery, 25.2v 10ah 7s3p 18650 lithium-ion battery pack manufacturer, 25.2v 10ah 7s3p 18650 lithium-ion battery pack supplier, OEM battery, RYDBATT, motorbike 6v battery, battery se chalne wali motorcycle, swappable battery, battery new bike, 61.2V LiFePO4 Lithium Battery, battery wali bike battery wali

Send Inquiry