12S2P Drone Battery With CANopen

12S2P Drone Battery With CANopen
Details:
RYDBATT 40.8V 21.6Ah (881Wh) 12S2P industrial UAV battery — 30A cont./130A pulse, CANopen telemetry, dual-layer protection, UN38.3. Flight-grade OEM pack for inspection, agriculture and delivery drones.
Send Inquiry
Description
Send Inquiry

 

12S2P drone battery with CANopen01

40.8V 21.6Ah Drone Battery Pack

Industrial UAV Power Module for Inspection, Agriculture, Mapping & Delivery

The RYDBATT LP-6252144-12S2P is a flight-grade 881Wh lithium-ion power system built for industrial UAVs that cannot tolerate voltage sag mid-air. Built on a 12S2P layout of matched grade-A high-energy cells (≈215 Wh/kg pack-level), it delivers 30A continuous with 130A 10-second pulses, streams per-cell telemetry over CANopen 125 kbit/s, and uses a two-tier protection architecture backed by 7 independent fuses - so protection keeps working even if the main MCU locks up.

✓ 881Wh  ✓ 30A / 130A  ✓ CANopen  ✓ Dual Protection 
✓ ≤60mΩ  ✓ UN38.3

 

Model LP-6252144-12S2P-40.8V21.6Ah
Configuration 12S2P (12 series × 2 parallel)
Nominal Voltage 40.8V
Capacity 21.6Ah typ. / 20.5Ah min
Energy 881Wh (≈215 Wh/kg pack-level)
Charge Voltage 50.4V (CC/CV, cut-off ≤0.02C)
Discharge Cut-off 30V (pack level)
Continuous Discharge 30A (sustained cruise / hover / payload)
Pulse Discharge 130A / 10s (takeoff, gust, emergency)
Pack Impedance ≤60mΩ (AC 1kHz, fresh pack)
Voltage Sag <5% from 100% to 5% SoC
Communication CANopen 125 kbit/s (object dictionary under NDA)
BMS Protection Two-tier OVP, staged OCP, UVP lockout, OTP, balancing
Hardware Fuses 2×30A charge path + 5×40A discharge path (MCU-independent)
Balancing Passive, starts ≥30mV delta, closes to ≤10mV
Cycle Life >100 cycles to 80% retention (1C discharge)
Weight ≈4.1 kg (with protective case)
Dimensions (max) 186.9 × 167.5 × 120.25 mm (±1.0mm)
Operating Temp. Charge 0–50℃ / Discharge -20–60℃
Shipping Voltage 40–41V (SoC ≤30% for transport)
Compliance UN38.3 / MSDS baseline; UL/IEC/ISO docs per project
Traceability File-numbered: cell lot → BMS fw → batch test data

 

Flight-Grade Power Characteristics
 

Low Sag Under Load

≤60mΩ pack impedance keeps voltage stable from full charge to 5% SoC, no brownouts under gimbal/payload load.

 

Takeoff Headroom

130A 10s pulse handles climb-outs, gust compensation and emergency maneuvers.

 

Telemetry-First

Per-cell V/T, SoC and fault codes over CANopen; your FC gets data, not just voltage pins.

 

Fail-Operational

Even if MCU hangs, 7 hardware fuses + cell-level lockouts still protect the pack.

 

Protection Architecture

Layer Mechanism
Cell over-voltage Two-tier: 4.23V alert → 4.265V cutoff, release at 4.10V
Pack over-voltage 50.76V backup cutoff (guards single-cell sensing fault)
Over-current (discharge) Staged: 60A/5min alert → 145A/10s hard cutoff
Over-current (charge) 30A then 60A staged
Under-voltage Deep-discharge lock at 2.8V/cell, wake-on-charger only
Thermal Charge <0℃ inhibited; full OTP with auto-sleep (300–500µA idle)
Hardware last-line 7 independent fuses, MCU-independent

 

Reference Flight Envelope

Metric Typical Value
Mid-size industrial multirotor 20–45 min endurance
Average draw 1.2–2.5 kW
Payload scenario Hover-in-wind, spray passes, LiDAR scan, vertical takeoff
Idle leakage 300–500µA auto-sleep
Capacity retention ≥85% after 28 days storage @25±5℃

 
 

Target UAV Applications

🔎
Powerline & Pipeline Inspection

🌾
Agricultural Spraying

🗺️
Mapping & LiDAR Survey

📦
Logistics & Delivery

🎥
Cinematography & Public Safety

🛰️
VTOL / Heavy-Lift Platforms

OEM / ODM Customisation
 

Electrical 

Capacity scaling, discharge profile, BMS current thresholds.

Communication 

CANopen baseline; CAN 2.0B / SMBus / UART on request.

Mechanical 

Enclosure size, mount points, IP rating, weight budget.

Connectors 

XT90-S / AS150 / M23 / aviation plug, cable routing.

Firmware 

BMS protection logic, SoC algorithm, DFM review.

Branding 

Neutral, white-label or private-label from 50 pcs.

 

Quality & Traceability
 

Cell Grading 

Capacity, IR and voltage matched per parallel group.

 

Pack Test 

Capacity, impedance, CAN telemetry, protection trigger per pack.

 

Environmental 

Thermal cycle, vibration, ≤60mΩ verification per batch.

 

Documentation 

File-numbered test report; cell lot → BMS fw → EOL data.

 

Transport 

Ships at 40–41V (SoC ≤30%), UN38.3/MSDS provided.

 

Warranty 

12-month base; extended terms for volume OEM.

 

LU3A2222
Why RYDBATT

✅ 20+ Years lithium system integration since 2005.
✅ Flight Logic - derate-first BMS, not storage-style hard cutoff.
✅ Dual Protection - MCU cutoffs + independent hardware fuses.
✅ Auditable Supply - every pack traceable from cell lot to test file.
✅ In-House - cell matching, welding, BMS, EOL testing.
✅ Export Ready - DG freight docs, serialized batch records.

 

FAQ

Q: What flight time can I expect?

A: 20–45 minutes on mid-size industrial multirotors drawing 1.2–2.5kW average, depending on payload and wind. Send your power profile for a projected endurance table.

Q: Can I integrate the CANopen data easily?

A: Yes - standard CANopen at 125 kbit/s reporting cell V/T, SoC and fault events. Object dictionary and protocol docs are shared under NDA.

Q: What happens if the BMS MCU freezes?

A: Seven hardware fuses (2 charge + 5 discharge) and cell-level lockouts operate independently of the MCU - protection does not rely on one processor.

Q: Can it charge below 0℃?

A: No - charging is inhibited below 0℃ to protect cells; discharge works down to -20℃. The BMS enforces this automatically.

Q: Is 30A continuous enough for my aircraft?

A: 30A sustains cruise/hover; 130A pulse covers takeoff and gusts. For sustained >30A loads, we scale the platform - tell us your controller specs.

Q: What certifications ship with the pack?

A: UN38.3 test summary and MSDS baseline. UL/IEC/ISO documentation prepared per project and destination market.

 

Hot Tags: 12s2p drone battery with canopen, high-drain battery cell, 12s2p drone battery with canopen manufacturer, 12s2p drone battery with canopen supplier, OEM battery, RYDBATT, 40 8V 21 6Ah Drone Battery Pack, High Drain 21700 Li ion Cells for Drones UAVs

Send Inquiry