RYDBATT RYD2105 - 21.6V 5.1Ah 6S2P Compact Device Battery (OEM/ODM)
The RYD2105 is a 110Wh-class 6S2P 18650 module built for device manufacturers who need a small, stable and protection-rich power core. Smart PCM with cell balancing, NTC temperature sensing, bracket structure and customizable footprint - ready to drop into medical, instrument and robotic products.
✓ 6S2P 18650 ✓ 21.6V 5.1Ah / 110Wh ✓ Cell Balancing ✓ NTC Monitoring ✓ ≤5A Continuous ✓ Compact & Customizable
Visual Reference



Key Features
✔ Smart Balancing Technology:
Our CW1274 chip features built-in equalization with 100Ω internal resistance, adjustable through external voltage sampling resistors (500Ω-2kΩ recommended). The intelligent odd-even channel time-sharing equalization ensures precise voltage management without compromising sampling accuracy.

✔ Robust Protection:
Temperature range: Charging (10-45°C), Discharging (-15-60°C)
Multi-layer safety: Overcharge/over-discharge protection
Industrial-grade PCB with reinforced solder pads

✔ Reliable Performance
300-cycle lifespan warranty
Storage recommendation: 20-40% charge at 25±5°C
UN38.3/UL certified safety standards
Core Specifications
| Model | RYD2105 (Li-18650-6S2P) |
|---|---|
| Chemistry | Li-ion NCM, grade-A 18650 cells (3.6V / 2550mAh class) |
| Configuration | 6S2P (6 series × 2 parallel, 12 cells) |
| Nominal Voltage | 21.6V (25.2V charge / 16.5V cutoff) |
| Capacity / Energy | 5.1Ah / 5100mAh · 110.16Wh |
| Continuous Discharge | ≤5A |
| Max Charge Current | ≤2.6A |
| PCM | Over-charge / over-discharge / over-current / short-circuit / temp protection |
| Cell Balancing | Time-sharing equalization, 30–50mA |
| Temperature Sensing | NTC 10K (B3950±1%) |
| Connectors | Standard discharge + NTC harness (customizable) |
| Structure | PCM bracket + PET/PVC insulation + heat shrink |
| Dimensions (ref.) | ≈140 × 39 × 66 mm |
| Weight | ≈635 g |
| Cycle Life | 300 cycles @ 80% capacity retention (0.2C) |
| Operating Temp. | Charge 10–45°C / Discharge -15–60°C |
| Storage | 20–40% SOC, 0–30°C, recharge every 3 months |
Target Applications
🩺
Medical Devices
📟
Portable Instruments
🤖
Cleaning / Service Robots
🚲
Light Mobility & E-Bikes
🔦
Professional Cordless Tools
📡
IoT & Backup Power
Why RYD2105 for Device OEMs
Cell Consistency
Graded 18650 cells, IR/OCV matched per batch.
Active Balancing
Keeps 6 strings aligned, extends pack life.
Thermal Visibility
NTC feed for host-side temp interlock.
Mechanical Stability
Bracket + insulation + shrink, vibration resistant.
Quality & Validation
| Stage | Control Point |
|---|---|
| Cell incoming | Capacity / IR / OCV grading per batch |
| PCM test | OV/UV/OCP/SCP/temp/balancing verification |
| Formation | Full charge-discharge cycle before seal |
| Reliability | Vibration, thermal cycle, drop, insulation check |
| Traceability | Cell lot → PCM batch → pack serial → test record |
| Shipping | ≤50% SOC, UN3481 declaration ready |
Procurement FAQ
Q: Is 5A enough for my device?
A: For low-to-moderate drain devices (medical, instruments, small robots) yes. If your peak exceeds 5A, tell us - we tune PCM rating or step up to a higher-C cell layout.
Q: Can you match our enclosure?
A: Yes. Share the battery bay drawing (L×W×H, fixed points, connector side); we re-layout the 6S2P + bracket to fit.
Q: Do you support fuel gauging?
A: Base version uses smart PCM + NTC. SMBus/I2C gauge can be added for host-side SoC reporting.
Q: What about air shipping?
A: 110Wh sits slightly above the common 100Wh carry-on threshold; we ship as UN3481 Section II with proper documentation and ≤50% SOC.
Q: Lead time for OEM orders?
A: Sample 7–15 days, mass production 30–45 days after drawing confirmation.
Hot Tags: 21.6V 5.1Ah 6S2P Battery OEM, 18650 lithium battery pack, 21.6V 5.1Ah 6S2P Battery OEM manufacturer, 21.6V 5.1Ah 6S2P Battery OEM supplier, OEM battery, RYDBATT, 18650 battery pack 7 4 v, Single External 18650 Lithium Battery, 8000mAh 18650 Battery, lithium ion battery model 18650, 18650 battery pack 14 8 v, li ion 18650 battery pack

