10.95V 21Ah 3S6P Security Camera Battery

10.95V 21Ah 3S6P Security Camera Battery
Details:
10.95V 21Ah 3S6P Li-ion battery pack with integrated heating for cold-start surveillance duty. 18 grade-A high-energy-density Li-ion cells give 21Ah typical / 20.0Ah minimum and 230Wh of energy, with 3A maximum charge current, an 8.1V discharge floor and heating-assisted discharge down to -20°C. UN38.3, UL, CE and RoHS documentation, 2-year limited warranty, 135 x 55.5 x 67.5mm at approximately 1.1kg.
Send Inquiry
Description
Send Inquiry

 

 

10.95V 21Ah 3S6P Security Camera Battery

Built for IP cameras, CCTV systems and outdoor surveillance. 3S6P architecture with grade-A high-energy-density Li-ion 18650 cells, integrated heating for -20°C cold starts and smart BMS/PCM protection - drop-in power for security OEM program

 Heating for -20°С
 Smart BMS/ PCM
 UL·CE· UN38.3 ·RoHS

jimeng-2026-10-10-6281-1 1001

10.95V

NOMINAL VOLTAGE

21Ah

NOMINAL CAPACITY

230Wh

TOTAL ENERGY

-20°C

DISCHARGE FLOOR


 

INSIDE THE PACK

 

3S6P: The Surveillance-Standard Layout

Three cell groups in series set the 10.95 V system voltage; six groups in parallel multiply capacity to 21 Ah and extend runtime. Nickel-strip spot welding and a rigid enclosure hold every 18650 cell through vibration, weather and year-round duty.

10.95 V nominal 3 series groups match the 3-cell camera bus

21 Ah capacity - 6 parallel groups × 3,500 mAh each

Grade-A 18650 cells - matched, welded and inspected group by group

12.45 V charge /8.1 V cut-off - safe window enforced by PCM

 

Stable Current for 24/7 Recording

 

product-1630-392
 

 

10.95V 21Ah 3S6P-Full Data

 

Parameter

Specification

Nominal voltage

10.95V (3S Li-ion, compatible with 11.1V / 12V systems)

Typical capacity

21Ah (minimum 20.4Ah)

Energy

≈230Wh

Configuration

3S6P, 18650 Li-ion cells

Standard charge

Constant current 3A / constant voltage 12.45V, cutoff 0.02C

Max charge current

3A

Standard discharge

3A (end voltage 8.1V)

Max continuous discharge

5A (PCM over-current trip ≈8.3A)

Discharge cut-off

8.1V

Shipment voltage

10.5 – 10.95V

Impedance

≤150 mΩ

Charge temperature

10°C – 45°C

Discharge temperature

-20°C – 60°C (heating assisted)

Storage temperature

1 month -20~45°C; 3 months -10~30°C; 1 year 0~30°C

Cycle life

≥500 cycles (to 70% of initial capacity)

Dimensions (L×W×H)

135 × 55.5 × 67.5 mm

Weight

≈1.1 kg

Protection

BMS/PCM: OVP, UVP, OCP, SCP, UVLO, temp protection

Certifications

UN38.3, UL, CE, RoHS

Warranty

2-year limited

 

 

FQA

 

Q: What cameras use a 10.95V battery?

A: Many IP and CCTV cameras run on a 3-cell (3S) Li-ion pack around 10.95V–11.1V. This 21Ah pack works as a drop-in replacement and backup for dome, Quick-Disconnect Connector and PTZ surveillance cameras.

Q: Can this battery work in cold weather?

A: Yes. The built-in heater and -20°C to 60°C range keep capacity in freezers, outdoor poles and northern-climate sites.

Q: What charger do I need?

A: Use a 12.6V (12.45V CV) Li-ion charger at 3A constant current with the correct DC connector; charge only at 10–45°C.

Q:Is the 21Ah capacity real for continuous recording?

A: At a typical 1.5–3A camera draw, 21Ah gives roughly 7–14 hours of runtime; the PCM limits continuous discharge to 5A for safety.

modular-1
Keep auspicious forever, ready to support ever!
Ryder-Lithium-choice for you.

Hot Tags: 10.95v 21ah 3s6p security camera battery, 18650 lithium battery pack, 10.95v 21ah 3s6p security camera battery manufacturer, 10.95v 21ah 3s6p security camera battery supplier, OEM battery, RYDBATT, 18650 li ion battery pack model f9 2p1s, 7 4 v 18650 battery pack, 18650 battery pack 14 8 v, lithium ion battery model 18650, 10.95V Li-ion Power Battery, pack 18650

Send Inquiry