
25.9V 20Ah 7S4P Smart Battery Pack with CAN Bus
Engineered for AGV, Mobile Robots, Inspection Equipment & Industrial Machines
The RYDBATT K050 is a communication-ready 25.9V lithium-ion battery built on a 7S4P 21700 NMC platform. With a 20Ah rated capacity (518Wh), 30A continuous discharge and an onboard CAN 2.0B BMS at 250 kbps, it lets equipment makers read SOC, voltage, current and temperature remotely - no extra telemetry hardware required. The pack is designed for OEM integration into automated guided vehicles, mobile robots, inspection platforms and industrial machines that need reliable, data-rich power.
✓ 25.9V 20Ah ✓ 518Wh ✓ CAN 2.0B ✓ 30A Cont. ✓ 7S4P 21700
✓ PCM + Balancing
| Chemistry | NMC Li-ion (21700 cylindrical) |
|---|---|
| Configuration | 7S4P (7 series × 4 parallel) |
| Nominal Voltage | 25.9V |
| Rated Capacity | 20Ah (Min 18.62Ah) |
| Energy | ≈518Wh |
| Charge Cut-off Voltage | 29.05V (max 29.4V) |
| Discharge Cut-off Voltage | 19.6V |
| Max Charge Current | ≤3A |
| Max Continuous Discharge | 30A (temp-cut at 70℃ cell surface) |
| Internal Impedance | <50mΩ |
| Communication | CAN 2.0B, 250 kbps |
| BMS Functions | Over-charge / over-discharge / over-current / short-circuit / temp protection / passive balancing |
| Balancing | Passive, 32–52mA, start at 4.0V/cell, Δ≥50mV |
| Dimensions (L×W×H) | 227 × 135.5 × 90 mm (±1mm, excl. handle) |
| Weight | ≈2.75 kg |
| Operating Temp. | Charge 5~45℃ / Discharge -20~60℃ |
| Cycle Life | ≥300 cycles to 80% capacity @25℃ |
| Warranty | 300 cycles or 1 year (whichever comes first) |
| Compliance | UN38.3 supported; CE/UL per project confirmation |
CAN-Bus Ready for Fleet & Machine Integration
Real-Time Telemetry
SOC, pack voltage, current, cell temps and fault flags over CAN 2.0B at 250kbps.
Controller Friendly
Works with AGV master controllers, robot MCUs and vehicle CAN networks.
Smart Sleep/Wake
Auto idle sleep after 2 min no-load; wake on charger or communication.
Diagnostic Ready
Protection events logged by BMS; easier field maintenance and fleet analytics.
Multi-Layer PCM Protection
Triple Over-Charge Guard
Software + hardware + fuse-level cutoff tiers.
Over-Discharge Lockout
Pack and cell-level protection with recovery hysteresis.
Over-Current & Short-Circuit
3-stage discharge over-current + sub-millisecond short-circuit response.
Temperature Envelope
Charge 5~45℃, discharge -20~60℃, MOSFET over-temp cutoff at 90℃.
Passive Balancing
Keeps cell spread tight across 300+ cycles.
ESD Protection
Contact ±4kV, air ±8kV per industrial grade.
Target Applications
🤖
AGV & AMR Robots
🛰️
Inspection & Survey Robots
🏭
Industrial Material Handling
🧹
Autonomous Cleaning Machines
🚜
Light Utility & Service Vehicles
🔧
Cordless Industrial Equipment
OEM / ODM Capabilities
Communication
- CAN 2.0B standard; RS485/UART/Bluetooth optional.
Mechanical
- Enclosure size, mounting, handle and connector layout customized.
Electrical
- Current limit, cut-off voltage and balancing strategy tunable.
Protocol
- CAN frame definition provided for controller integration.
Branding
- RYDBATT white-label or private label, manuals, packaging.
Compliance
- UN38.3 shipping docs; CE/UL support per target market.
✅ 20+ Years lithium system integration since 2005.
✅ In-House BMS - CAN protocol, protection logic and balancing fully controllable.
✅ Cell-to-Pack Engineering - 21700 NMC grading, spot welding and PCM validation.
✅ Integration Support - CAN DBC, wiring diagram and sampling support.
✅ Quality Control - Formation, aging, vibration and communication bench test.
✅ Stable Supply - Mature production for recurring OEM volumes.

Quality & Validation
Cell Grading
Capacity and IR matched before 7S4P assembly.
BMS Test
Over-current, short-circuit, temp cutoff and CAN telemetry verified.
Cycle Test
300-cycle validation at 0.2C to 80% capacity.
Mechanical
Vibration per spec (10–55Hz, X/Y/Z 30min each).
Frequently Asked Questions
Q: Is this just a 24V battery with a CAN chip?
A: No. The K050 integrates a full CAN 2.0B BMS - SOC, current, temperature and fault data are broadcast live, making it suitable for fleets and connected equipment, not just basic power.
Q: What communication protocol does it use?
A: CAN 2.0B at 250 kbps as standard. RS485, UART or Bluetooth can be evaluated for custom projects.
Q: Can it run a 30A load continuously?
A: Yes. Rated continuous discharge is 30A, with multi-stage over-current protection up to 80A hardware cutoff.
Q: Is the cell brand visible to customers?
A: The pack uses graded 21700 NMC cells. Cell sourcing is managed under RYDBATT quality control; branding stays RYDBATT.
Q: What certifications are provided?
A: UN38.3 shipping support as baseline. CE/UL documentation available per project and target market.
Q: How is the battery woken from sleep?
A: After 2-minute idle it sleeps; it wakes on charger connection or CAN communication activity.
Hot Tags: 25.9v 20ah 7s4p battery with can bus rydbatt oem, golf cart battery, 25.9v 20ah 7s4p battery with can bus rydbatt oem manufacturer, 25.9v 20ah 7s4p battery with can bus rydbatt oem supplier, OEM battery, RYDBATT, 3 6 volt lithium battery, 3 7 volt 1200mah rechargeable lithium battery, 30 kwh lithium battery, 3s lithium ion battery, 48V 12.8Ah Long Range battery, lithium polymer battery price

