36V 7Ah 10S2P Battery OEM

36V 7Ah 10S2P Battery OEM
Details:
RYDBATT RYD3650 36V 7Ah 10S2P 18650 battery with PCM & NTC. 255Wh compact module for portable instruments, robots & light EV OEM projects.
Send Inquiry
Description
Send Inquiry

 

 

RYDBATT RYD3650 - 36V 7Ah 10S2P Compact Device Battery (OEM/ODM)


The RYD3650 is a 255Wh-class 10S2P 18650 module built for equipment manufacturers who need a lightweight, stable and protection-rich power core. Smart PCM with NTC monitoring, grade-matched cells and customizable envelope - ready to integrate into portable instruments, commercial devices and light mobility products.


✓ 10S2P 18650 ✓ 36V 7Ah / 255Wh ✓ PCM + NTC ✓ ≤15A Continuous ✓ ~1.15kg ✓ Compact & Customizable

 
Visual Reference
 

 

product-977-549
RYD3650 Pack Front
product-678-511
PCM & NTC Layout
product-953-590
Device Bay Integration

 

Core Specifications

Model RYD3650 (Li-18650-10S2P)
Chemistry Li-ion NCM, grade-A 18650 cells (3.6V / 3500mAh class)
Configuration 10S2P (10 series × 2 parallel, 20 cells)
Nominal Voltage 36V (36.5V nominal / 42V charge / 27V cutoff)
Capacity / Energy 7Ah (6.4Ah min) / 255.5Wh
Continuous Discharge ≤15A
Max Charge Current ≤3.2A
PCM Over-charge / over-discharge / over-current / short-circuit / temp protection
Temperature Sensing NTC 10K (B3950 class)
Connectors Standard discharge + charge port (customizable)
Structure Spot-welded nickel strip + PET insulation + heat shrink / bracket
Weight ≈1.15 kg
Cycle Life 300+ cycles @ 80% capacity retention (25°C)
Operating Temp. Charge 5–45°C / Discharge -20–60°C
Storage 20–40% SOC, 10–25°C, recharge every 3 months

 

Why RYD3650 for Device OEMs

Cell Consistency

Capacity & IR graded per batch before assembly.

Thermal Visibility

NTC feed for host-side temp interlock.

Lightweight

~1.15kg pack for portable and wearable-class devices.

Compact 10S2P

High energy density in a small envelope.

Stable Output

Low internal resistance, no sag under 15A load.

Custom-Ready

Size, connector, harness, label all projectable.

 
OEM / ODM Customization
 

 

01/

Electrical - discharge rate, charge limit, protection thresholds.

02/

Mechanical - pack dimensions, bracket shape, mounting points.

03/

Interface - connector type, cable length, NTC / comms wiring.

04/

Software - optional UART/SMBus fuel gauge on request.

05/

Identification - QR/barcode, serial traceability per pack.

06/

Compliance - UN38.3, MSDS, CE/RoHS, batch test report.

For visual reference, the PCM layout illustrates the compact and efficient design of our protection module:

product-617-338

 

Safety and Compliance Labels

 
product-66-183

 

 

All Ryder batteries feature clear warning labels to ensure user safety and regulatory compliance. These emphasize critical precautions:

 

 

Label details: "Rechargeable Li-ion Battery Pack - Model: RYD-36.5V 7Ah-X3. Ratings: 36.5V=7Ah, 255.5Wh. Charging voltage: 42V. CAUTION: Do not expose to high temperature; Do not short circuit; Use only with specified charger."

Packaging includes precise dimensions for secure handling:

product-222-297

Quality & Validation

 

 

Stage Control Point
Cell incoming Capacity / IR / OCV grading per batch
PCM test OV/UV/OCP/SCP/temp/NTC verification
Formation Full charge-discharge cycle before seal
Reliability Vibration, thermal cycle, drop, insulation check
Traceability Cell lot → PCM batch → pack serial → test record
Shipping ≤50% SOC, UN3481 declaration ready

 

Procurement FAQ

 

 

Q: Is 15A enough for my device?

A: For portable instruments, light robots and 250W-class mobility, yes. If peak exceeds 15A, tell us - we tune PCM rating or move to a higher-C cell layout.

Q: Can you match our enclosure?

A: Yes. Share the battery bay drawing (L×W×H, fixed points, connector side); we re-layout the 10S2P + bracket to fit.

Q: Do you support fuel gauging?

A: Base version uses smart PCM + NTC. UART/SMBus gauge can be added for host-side SoC reporting.

Q: What about air shipping?

A: 255Wh is under the 300Wh limit for Section II; we ship as UN3481 with proper docs and ≤50% SOC.

Q: Lead time for OEM orders?

A: Sample 7–15 days, mass production 30–45 days after drawing confirmation.

Hot Tags: 36V 7Ah 10S2P Battery OEM, electric bicycle battery, 36V 7Ah 10S2P Battery OEM manufacturer, 36V 7Ah 10S2P Battery OEM supplier, OEM battery, RYDBATT, 14 8 v lithium battery, solar panel for lithium battery, lithium battery systems, 3 7 lithium battery, 10000 mah lithium ion battery, 7 4 v lithium ion battery

Send Inquiry