
8S 25.6V 18Ah Lightweight LiFePO4 Power Module
OEM/ODM Battery Core for Light E-Motorcycles, E-Bikes & Low-Speed Two-Wheelers
The RYDBATT RYD-2518-LW is built on 32700 LiFePO4 cells in an 8S3P topology - 25.6V nominal, 18Ah (≈460Wh), packed into a 3.5kg ultrasonically sealed enclosure. Designed for light electric two-wheelers, it combines LFP thermal safety, 2000-cycle life and a configurable BMS (over-charge / over-discharge / over-current / short-circuit / temperature) in a form factor that drops into frame cavities without rebalancing the vehicle.
✓ 8S LFP ✓ 32700 Cells ✓ 460Wh ✓ 3.5kg ✓ Smart BMS
✓ 2000 Cycles
| Chemistry | LiFePO4 (LFP), 32700 cylindrical cells |
|---|---|
| Configuration | 8S3P (24 cells) |
| Nominal Voltage | 25.6V (3.2V/cell) |
| Capacity | 18Ah (min ≥17.5Ah) |
| Energy | ≈460Wh |
| Charge Voltage | 29.2V cut-off |
| Discharge Cut-off | 20.0V |
| Standard Charge | 0.2C (≈3.6A), max 0.5C (≈9A) |
| Continuous Discharge | ≤20A (BMS rating configurable) |
| Peak Discharge | 40A (3s, configurable) |
| BMS | PCM + smart protection: OVP/OCP/SCP/OTP; CAN/RS485 optional |
| Cycle Life | ≥2000 cycles @80% DoD |
| Internal Resistance | ≤40mΩ (pack level) |
| Dimensions | Customizable (typical 175×165×125mm class) |
| Weight | ≈3.5kg |
| Enclosure | Ultrasonically sealed ABS, IP-rated optional |
| Operating Temp. | Charge 0–45℃ / Discharge -20–60℃ |
| Compliance | UN38.3 / MSDS baseline; CE/RoHS documentation per project |
| Warranty | 12 months against manufacturing defects |
Why 8S 32700 for Light Two-Wheelers
32700 Large-Cylinder
Better thermal mass and shock resistance than 18650 in bumpy ride conditions.
01
3.5kg Class
Easy to mount, swap or carry; lowers unsprung weight on e-bikes/scooters.
02
460Wh Practical
Matches 250–500W light e-moto daily commute range.
03
Configurable BMS
Current limit, communication and protection logic tunable per vehicle platform.
04
BMS & Protection
| Over-charge | Single-cell 3.65V detect, release 3.40V |
|---|---|
| Over-discharge | Single-cell 2.30V detect, release 2.80V |
| Over-current | Primary 30A / 1s; secondary 60A / 200ms (configurable) |
| Short-circuit | >100A, sub-500µs response |
| Temperature | NTC monitoring, charge cutoff at 0℃ / 45℃ |
| Communication | Optional UART / RS485 / CAN for SOC & fault reporting |
Target Applications
🛵
Light E-Motorcycle / Moped
🚲
E-Bike / Pedelec
🛺
Three-Wheel Delivery Vehicle
🛴
Shared / Rental Scooter
🏍️
Low-Speed Commuter EV
🏭
Industrial Handcart / AGV
what is cnc machinging
✅ 20+ Years lithium system integration since 2005.
✅ In-House BMS - protection logic and communication stack developed internally.
✅ Cell-to-Pack QC - grading, formation, aging, full inspection.
✅ Flexible Volume - samples to mass production for vehicle builders.
✅ Export Ready - documentation for global air/sea freight.
✅ Confidential - NDA before drawing exchange.

Quality & Validation
Cell Level
Capacity, IR and voltage grading before assembly.
BMS Test
Protection, recovery and balancing verified per unit.
Pack Aging
Full charge-discharge cycle, capacity and IR confirmation.
Environment
Vibration, thermal and humidity testing per batch.
FAQ
Q: Is this the same as the existing 25.6V 18Ah lead-acid replacement page?
A: Electrically related, but that page is a generic consumer-facing write-up. This is the OEM module page - focused on 8S architecture, BMS config and vehicle integration. The old page should 301-redirect or canonical here.
Q: Can it replace a 24V lead-acid battery?
A: Yes, as a 24V-class drop-in. But use a LiFePO4 CC/CV charger (29.2V), not a lead-acid charger.
Q: What motor power can it support?
A: 20A continuous at 25.6V covers ~500W-class light e-moto; peak headroom for short hill starts.
Q: Can I add CAN communication?
A: Yes. CAN 2.0B or RS485 BMS variant available, with register map for vehicle controller integration.
Q: What certifications are provided?
A: UN38.3 and MSDS baseline; CE/RoHS/UL documentation prepared per project and target market.
Q: What is the MOQ?
A: Project-based. Samples available for validation before volume production.
Hot Tags: 8s 25.6v 18ah lifepo4 module light e-moto oem, electric motorcycle battery, 8s 25.6v 18ah lifepo4 module light e-moto oem manufacturer, 8s 25.6v 18ah lifepo4 module light e-moto oem supplier, OEM battery, RYDBATT, battery wali new bike, 73V 20.8 Ah Lithium Ion Battery, fast charging motorcycle battery, top bike battery, all bike battery price, 61.2V 39.6Ah electric motor battery

