12-Bay NiMH Charger OEM

12-Bay NiMH Charger OEM
Details:
RYDBATT 12-bay smart charger for AA/AAA NiMH & NiCd. Independent channels, LCD status, bad-cell detection, -ΔV + timer protection. For service centers & OEM. CE/UL ready.
Send Inquiry
Description
Send Inquiry

 

12-Bay NiMH Charger OEM

12-Bay Smart Charger for NiMH / NiCd Batteries

Independent-Channel AA/AAA Charging Station for Service Centers & Equipment Fleets

The RYDBATT RYD-CH12-LCD is a 12-bay intelligent charger for AA/AAA NiMH and NiCd rechargeable batteries. Each bay charges independently with its own LCD status, bad-cell detection and -ΔV cut-off. It is built for procurement teams who need a reliable battery-maintenance station for instruments, communication devices, security equipment and after-sales service centers - not a consumer gadget.

✓ 12 Independent Bays   ✓ NiMH + NiCd  ✓ Per-Bay LCD
✓ Bad-Cell Detect            ✓ -ΔV + Timer     ✓ OEM/ODM

 

 

Model RYD-CH12-LCD
Compatible NiMH / NiCd AA & AAA (1.2V)
Channels 12 independent slots, mix AA/AAA
Input DC 12V / 1.6A (AC adapter customizable)
Output AA: 1.2V 500mA ×12 / AAA: 1.2V 250mA ×12
Control MCU controlled, -ΔV detection
Display Per-bay LCD: voltage / current / time / status
Detection Bad-cell & non-rechargeable cell auto-identify
Safety Short-circuit, reverse polarity, over-temp, 8h timer
Refresh Mode Discharge + recharge cycle for NiCd recovery
Enclosure Fire-retardant ABS+PC, benchtop form factor
Compliance CE / RoHS baseline; UL pathway available
Supply Model Sample -> pilot -> volume OEM/ODM

 

Why Procurement Teams Specify RYD-CH12-LCD
 

 

Independent Channels 

Each bay charges by its own state; one bad cell never blocks the rack.

Bad-Cell Screening 

Auto-flags dead/leaky/non-rechargeable cells before they waste bench time.

Predictable Maintenance 

LCD shows real voltage/current/time, turning battery care into a managed process.

NiCd Recovery 

Refresh mode breaks memory effect on legacy industrial cells.

Safety by Default 

ΔV + 8h timer + reverse-polarity lockout, no overcharge risk.

Brand-Ready 

Logo, label, plug, carton and firmware message all customizable.

Target Use Cases

 

📟
Instrument & Meter Fleets

📻
Two-Way Radio / Walkie Sets

🔐
Security & Access Control

🏥
Medical Device Backup Cells

🛠️
After-Sales & Repair Centers

🏢
Facility Management Stockrooms

Quality & Validation

 

Stage Control Point
Incoming IC/MCU batch check, adapter safety verification
Channel test 12-bay independent current/voltage calibration
Safety Reverse polarity, short-circuit, over-temp, timer cut-off
Detection Bad-cell & non-rechargeable identification accuracy
Aging Full-load cycling before release
Compliance CE/RoHS baseline; UL/cert-per-market on request
Traceability Lot -> PCBA -> test record -> serial label

 

OEM / ODM Engagement
 

Brief - cell type, bay count, input plug, target market.

1

>>

Proposal - schematic, BOM, enclosure, certification path.

2

>>

Sample - 15-25 working days, bench validation.

3

>>

Pilot - small batch for service-center rollout.

4

>>

Mass - 30-45 days, full docs, export packaging.

5

>>

Support - spare PCBA, warranty framework, firmware tweaks.

6

Why RYDBATT
✅ Since 2005 - 20+ years in battery systems & chargers.
✅ In-house PCBA - MCU logic, SMT and calibration done internally.
✅ QMS certified - manufactured under ISO 9001 quality management system.
✅ Charger+battery sync - matched with RYDBATT NiMH/NiCd/Li-ion packs.
✅ Export ready - CE/RoHS, DG-aware logistics support.
✅ Confidential - NDA before drawing & firmware exchange.

lithium system integration since 20051

 

FAQ

Q: Can it charge Li-ion 18650 too?

A: This page's platform is NiMH/NiCd only. A multi-chemistry variant (with 3.6/4.2V channels) is available as a separate OEM project.

Q: What happens if one cell is dead?

A: The bay flags it on the LCD and stops charging that slot; the other 11 bays keep running.

Q: Can we private-label it?

A: Yes. Logo, label, carton, adapter plug and startup screen are all customizable.

Q: Is 8-hour timer enough for full AA?

A: For typical 2000-2900mAh AA, -ΔV cut-off finishes earlier; the 8h limit is a safety backstop only.

Q: What is MOQ and lead time?

A: Sample accepted; pilot and mass MOQ project-based. Typical mass lead time 30-45 working days.

Q: Does it pair with RYDBATT battery packs?

A: Yes. We can supply matched AA/AAA cells or integrate the charger into a larger battery system quote.

Hot Tags: 12-bay nimh charger oem, NiMH battery charger, 12-bay nimh charger oem manufacturer, 12-bay nimh charger oem supplier, OEM battery, RYDBATT, 9 6 v nimh battery charger, nimh smart charger, nimh rapid charger, nimh batteries and charger, nimh charger lithium batterie, simple nimh battery charger

Send Inquiry