12.8V 200Ah LFP Module

12.8V 200Ah LFP Module
Details:
RYDBATT 12.8V 200Ah LiFePO4 stationary module (2.56kWh). 200A cont., 400A peak, 2000+ cycles, smart BMS, CAN/RS485. For UPS, telecom & off-grid ESS. OEM/ODM.
Send Inquiry
Description
Send Inquiry

 

128V 200Ah LFP Module1

12.8V 200Ah LiFePO4 Stationary Storage Module

2.56kWh 4S Deep-Cycle Platform for UPS, Telecom & Off-Grid Power Systems

The RYDBATT RYD-ESS128200 is a 12.8V 200Ah lithium iron phosphate module built on a 4S architecture, delivering approx. 2.56kWh with 200A continuous and 400A peak output. It is engineered as a drop-in lead-acid replacement for fixed installations - telecom cabinets, UPS strings, micro-grid nodes and off-grid equipment rooms - where batch consistency, communication-ready BMS and long service life matter more than portability.

✓ 4S LFP  ✓ 2.56kWh  ✓ 200A Cont.  ✓ 400A Peak
✓ 2000+ Cycles             ✓ CAN/RS485

 

 

 

 

 

Model RYD-ESS128200
Chemistry LiFePO4 (LFP), 32700 cylindrical cells
Configuration 4S (series base, parallel scalable)
Nominal Voltage 12.8V (14.6V charge / 8.8V cutoff)
Capacity 200Ah (212.5Ah nominal / 204Ah minimum)
Energy ≈2.56–2.72kWh (per original spec)
Continuous Discharge 200A
Peak Discharge 400A short-duration
Charge Current 50A standard / 200A max (configurable)
BMS OV/UV/OCP/SCP/OTP + balancing; CAN/RS485/UART option
Enclosure Metal/ABS hybrid, rack or cabinet mount
Dimensions 524 × 233 × 229 mm
Weight ≈27kg
Cycle Life >2000 cycles @ 80% DoD
Operating Temp. Charge 0–45°C / Discharge -20–60°C
Compliance UN38.3 / MSDS baseline; CE/RoHS per market
Supply Model Sample -> pilot -> volume OEM/ODM

 

Why System Integrators Specify RYD-ESS128200

True 4S Platform

standard 12V-bus architecture, drops into existing lead-acid trays and 12V inverter systems.

 

High Current Headroom

200A continuous covers inverters, motor loads and surge starting.

 

Communication Ready

CAN/RS485 telemetry for SOC, fault flags and remote battery health monitoring.

 

Scalable Topology

parallel up to 4 units (800Ah); series-ready for 24V/48V strings.

 

Low TCO

2000+ cycles vs. 300–500 for lead-acid; near-zero maintenance.

 

Batch Consistency

cell grading, formation, full inspection and serial-level traceability per module.

 

 

Target Applications

 

📡
Telecom Base Stations

🖥️
UPS & Data Cabinet Backup

🏭
Micro-Grid / Hybrid Inverter Nodes

⚡
Off-Grid Equipment Rooms

🛰️
Remote Sensing & SCADA

🏕️
Solar Storage (commercial-scale)

Quality & Validation

 

Stage Control Point
Cell incoming Capacity & IR grading, OCV matching
BMS Threshold verification: OV/UV/OCP/SCP/OTP + balancing
Assembly Busbar torque, insulation resistance, thermal interface check
Formation Full charge/discharge cycle before release
Reliability Vibration, thermal cycle, drop test
Cycle validation Sample accelerated cycle to confirm 2000+ @ 80% DoD
Traceability Serial -> cell lot -> BMS fw -> test report

 

OEM / ODM Engagement
 

 

Brief 

load profile, inverter type, bay size, communication, market.

Proposal 

4S config, BMS current, enclosure, protocol, BOM.

Sample 

bench + site validation, 15-25 working days.

Pilot 

small batch, consistency & EMS joint debugging.

Mass 

30-45 days, full docs, DG packaging, freight support.

Support 

warranty framework, spare BMS, depot-level diagnostics.

 

Why RYDBATT
✅ Since 2005 - 20+ years lithium system integration.
✅ In-house BMS/PACK - protocol & enclosure engineered internally.
✅ QMS certified - manufactured under ISO 9001 quality management system.
✅ Project-scale - sample to pilot to rolling volume supply.
✅ Export ready - UN38.3/MSDS, DG freight, market cert pathways.
✅ Confidential - mutual NDA before drawing exchange.

84000 Facility

 

FAQ

Q: Is this just an RV/camping battery?

A: No. It is a stationary 4S LFP module for fixed power systems - UPS, telecom, micro-grid and off-grid ESS - not a mobile leisure product.

Q: How is it different from the 12.8V 100Ah page?

A: 100Ah page targets drop-in lead-acid replacement for mobile use; this 200Ah module targets fixed installations with higher current and communication-ready BMS.

Q: Can the BMS talk to our EMS?

A: Yes. CAN/RS485/UART configurable; we joint-debug the protocol at sample stage against your inverter or controller.

Q: Can modules be paralleled?

A: Yes. Up to 4 units in parallel (800Ah); series connection supported for 24V/48V strings.

Q: What documents ship with bulk orders?

A: UN38.3 test summary and MSDS baseline. CE/RoHS/REACH packs issued against your target market.

Q: What is MOQ and lead time?

A: Sample orders accepted; pilot and mass MOQ project-based. Typical mass lead time 30-45 working days.

 

 

Hot Tags: 12.8v 200ah lfp module, LiFePO4 battery pack, 12.8v 200ah lfp module manufacturer, 12.8v 200ah lfp module supplier, OEM battery, RYDBATT, lifepo4 battery pack, lifepo4 6 6 v, 24V 150Ah Battery, lifepo4 lithium battery pack, 12.8V 100Ah Replacment Battery for Lead Acid, lifepo4 powerpack

Send Inquiry