RYDBATT Li Ion 18650 Battery Pack 10S4P - 36V 10.4Ah for 36V electric bicycle battery

Li-ion - 18650 - 10S4P - 36V 10.4Ah for 36V electric bicycle battery

Product Specification:

* Accurate electricity display.

* With lock anti-theft, pull-up structure can be removed. 

* The production environment conforms to international standards.

MODEL
Li-18650-10S4P-36V 10.4Ah BMS Specification: F36V20/60A-NS Communication Protocol: NO Fault State Detection: NO SOC Display: YES
Product Specification
NO.	Content	Testing method	Remark
1	Charge Voltage	36 V
2	Discharge Cut-Off Voltage	25.0 V
3	Standard Charge	Charge the battery at constant current of 0.2C to reach 42.0V.
		Then charge the battery at constant 42.0V voltage until the charging current decreasing to 0.02C.
4	Standard Discharge	After the standard charging, rest for 1 hour then discharge to 25.0V@0.2C.
5	Maximum Continuous Discharge Current	20 A
6	Pulse Maximum Discharge Current	60 A	W5S
7	Rated Capacity	Typical capacity: 8.7Ah	Standard discharge after standard charge
		Minimum capacity: 8.25Ah -5%
8	Operation	Charging: 10~45°C	60±25%R.H
	Temperature Range	Discharging: -20~60°C
9	Storage	≤ month: - 20~45*C	60±25%R.H Best 10~25°C for long-time storage
	Temperature	≤ months: -10 ~ 25C
		≤1year: 0 ~ 30°C
10	Impedance	≤160mΩ
11	Size Of Battery Pack	≈223*134*120mm
Product Electric Performance Test
NO.	Items	Test Conditions	Requirements
1	Capacity Retention	Fully charging, store them at (20 ± 5)笆 for	Discharging time>250min
		28 days, then discharge to 30.0V @0.2C.
2	Cycle Life @251	Discharge to 27.5V @0.2C, then Charge the battery @0.2C to reach 42.0V. Then charge the battery at constant 42.0V voltage until the charging current decreasing to 0.02C. Rest for 10 min. discharge to 30.0V@ 0.2C and rest for 10 min. Continue the charge/discharge cydes until discharge capacity lower than 80% of rated capacity.	Cycles life M300
3	Storage	Charge the battery to 40%~65% of its rated capacity using standard charging mode, then keep it in an 20t ± 5*C, humidity 45% ~ 85% room for 12 months, fully charge and discharge it @0.2C until voltage down to 30.0V.	Discharge time>210min
		(The testing sample should be within 3 months dated from production date)
Mechanical Performance
NO.	Content	Testing method	Requirements
1	Vibration Test	After standard charging, put battery on the vibration table. 30 min experiment from X, Y, Z axis. Scan rate: 1oct/min; Frequency 10-30Hz, Swing 0.38mm; Frequency 30-55Hz, Swing 0.19mm.	No influence to batteries' electrical performance and appearance.
2	Drop Test	Random drop the battery from 1.0m height onto wood board 2 times.	No explosion or fire

Delivery Time:

- Material Preparation Time: 7-15 days (or inventory)

- Production & Assembly Time 3-10 days

- Testing & Packaging Time: 2-10 days

- Total Delivery Time: 30-45days

- The faster delivery could be negotiable.

Factory photo:

Contact with our sales team for your OEM and ODM order.

OEM/ODM Service:

If you want to display your own brand LOGO on the goods such as Product, package bag, label or any where. It is no any problem. Our OEM and ODM service is always ready to do it.

Packing:

According to Stardard Export Packing.

Carton box, wooden box, wooden pallet