Shenzhen RYDBATT Electronics Co., Ltd. is one of the leading manufacturers and suppliers of 36V 10Ah 21700 Battery Module OEM in China. Welcome to buy CE approved batteries in stock here and get free sample from our factory. All customized products are with high quality and low price.
36V 10Ah 21700 Compact Power Module
10S2P High-Density Lithium Module for Space-Constrained Equipment
The RYDBATT RYD-36M100 is a 36V 10Ah compact lithium module built on 21700 cells in a 10S2P layout. With a 312mm narrow profile and 2.3kg mass, it targets equipment where envelope space is tight but energy density cannot be compromised - light industrial devices, mobile robots, portable work tools, medical carts and compact mobility platforms. Self-developed PCM, NTC monitoring and batch cell-matching make it suitable for repeatable volume integration.
✓ 21700 Cells ✓ 10S2P ✓ 312mm Narrow ✓ PCM + NTC
✓ Vibration Tested ✓ OEM/ODM
| Module | RYD-36M100 |
|---|---|
| Chemistry | Li-ion (21700, grade-matched) |
| Configuration | 10S2P |
| Nominal Voltage | 36V (42V charge / 28V cutoff) |
| Capacity | 10Ah (min. 9.5Ah) |
| Energy | ≈360Wh |
| Continuous Discharge | 12A (peak headroom via PCM) |
| Charge Current | ≤2A standard |
| Protection | PCM-F36V: OV/UV/OCP/SCP/OTP + NTC |
| Indicators | 5-stage LED power display, button activated |
| Dimensions (L×W×H) | 312 × 87 × 65 mm |
| Wire Length | 80mm (customizable) |
| Weight | ≈2.3 kg |
| Vibration | 10-55Hz, X/Y/Z 30min/axis |
| Operating Temp. | Charge 10-45°C / Discharge -20-60°C |
| Cycle Life | ≥300 cycles @ 80% DoD |
| Connectors | Charge DC5521 / Discharge 4-pin+2-pin (customizable) |
| Compliance | UN38.3 / MSDS baseline; CE/RoHS per project |
| Supply Model | Sample -> pre-production -> volume OEM/ODM |
Why Engineers Specify RYD-36M100
21700 Density
higher energy per volume than 18650, same envelope, more runtime.
Narrow 312mm Profile
fits slim compartments, downtubes, mobile equipment chassis.
Self-Developed PCM
RYDBATT-owned protection logic, tunable thresholds.
NTC Thermal Monitoring
real-time temperature sensing, safer charge/discharge.
Batch Cell Matching
capacity & IR graded before assembly for consistency.
Vibration Qualified
10-55Hz 3-axis tested for mobile duty.
Target Applications
🛠️
Light Industrial Equipment
🤖
Mobile Robots / AMR
🚲
Compact E-Mobility
🏥
Medical Carts & Devices
📦
Portable Logistics Tools
🔧
Cordless Work Platforms
Engineering & Customization
Mechanical
envelope, bracket, mount points, impact rating, enclosure material.
Electrical
PCM current rating, cutoff logic, charge profile, indicator mode.
Interface
connector type, pinout, cable length & gauge, harness drawing.
Software
SoC display logic, optional UART/CAN communication.
Thermal
NTC placement, optional heating film for low-temp charge.
Branding
neutral, white-label or private label, barcode & packaging.
Quality & Validation
| Stage | Control Point |
|---|---|
| Cell incoming | Capacity & IR grading, OCV matching |
| PCM | OV/UV/dual-stage OCP/SCP/OTP threshold verification |
| Assembly | Spot-weld QC, insulation resistance, torque check |
| Formation | Full charge/discharge cycle before shipment |
| Reliability | Vibration 10-55Hz, thermal cycle, 28-day storage retention |
| Traceability | Serial -> cell lot -> PCM fw -> test report |
Frequently Asked Questions
Q: Is this the same as a standard 36V 10Ah e-bike pack?
A: No. This is a 10S2P 21700 compact module with a 312mm narrow profile and self-developed PCM. It is engineered for equipment integration, not just consumer retrofit.
Q: What motor power does 12A support?
A: Roughly 250W-350W nominal. For higher-power platforms we tune the PCM and cell grade accordingly - tell us your load profile.
Q: Can connectors and harness be customized?
A: Yes. Charge/discharge connectors, pinout, cable length and gauge are all customizable to your drawing or sample.
Q: What documents ship with bulk orders?
A: UN38.3 test summary and MSDS baseline. CE/RoHS packs issued against your target market; UL per project scope.
Q: Can I order one sample?
A: Yes. A single evaluation unit is enough to start; we confirm spec in writing before building.
Q: How is it stored and shipped?
A: Store at 20-40% charge, 10-25°C. Ship at <=30% charge, max 7 cartons stacked, away from >65°C ambient.
Hot Tags: 36V 10Ah 21700 Battery Module OEM, China 36V 10Ah 21700 Battery Module OEM manufacturers, suppliers, factory, 36V 48V 52V Ebike Battery Pack, li nmc battery pack, large lithium ion battery pack, large lithium battery bank, 5 kwh lithium ion battery price, 7 2 kwh lithium ion battery
