|Place of Origin:||CHINA|
Payment & Shipping Terms:
|Minimum Order Quantity:||500|
|Price:||Negotiated The Price|
|Packaging Details:||Customer requirements|
|Delivery Time:||30-45 work days|
|Payment Terms:||D/P, T/T,|
|Supply Ability:||800PCS /Day|
RYDBATT IC99 Multi function intelligent charger Charge discharge PC-LINK Lithium Ion Battery Charger
|Major Features||power display|
|Advanced MCU control|
|Optional charging voltage|
|Supports the charging and discharging of NiMH, Ni Zn, Fe Li, Li batteries|
|Dedicated PC software support.|
|Product description:||1-4PCS 1.2VNI-MH NI-CD NI-ZN LI-ION FeLI|
|DC Output:100mA-2000mA Programmable|
|Features:||Suitable for 1-4pcs battery|
|CC CV charging & advanced IC control & -△V|
|Independent arging channel with LCD indication|
|Full protection for short-circuit & reverse polarity|
|LCD displays charge and discharge status and data.|
|Universal AC input for worldwide use|
When discharging current is 100MA-1000MA, it can be adjusted as 100MA step by step.
Notes: Charging current will be gradually reduced when the batteries are almos t full. When current is more than 300MA and voltage more than 1.45V, Ni-MH will be gradually reduced.
For discharging current, maximum discharging current of Ni-MH will re ach 1000MA only when battery voltage is relatively high. Typically spe aking, entire discharging process at most can be maintained at 800MA(it is related to the internal resistance).
For charging current, maximum charging current of Ni-MH will reach 1 000MA (it is related to the internal resistance).
(2) BASIC KEY FUNCTION
SLOT: continuously short press SLOT key to select the channel 1/2/3/4, select all, confirm, return to 1 and cycle.
CURRENT: Press CURRENT key to adjust the current when the channel is selected. If there is no channel currently to be selected, press CURRENT key to select the four channels simultaneously, then short press to adjust the current.
DISPLAY: When the channel is selected, press DISPLAY key to switch the display of selected channel. When no channel is selected, press DISPLAY key to switch the display of all channels.
Note: The refresh mode not only shows the capacity, time, current, voltage, internal resistance, but also increases the number of cycles.
MODE: When the channel is selected, short press MODE key to switch the mode of the selected channel. If no channel is selected, press MODE key to select the four channels simultaneously, then short press the switch mode.
Note: The above is the basic key function and the second functions will be described in the functional operation.
(3) DISPLAY INTERFACE
A. MAH: battery capacity unit, example: 1000MAH for 1000MA current working for 1 hour.
B. MA: current unit, mA.
C. V: voltage unit, volts.
D. H: time unit, hours.
E. mΩ: resistance unit, milliohm. Working mode:
A. CHARGE: the charging mode.
DISCHARGE: the discharge mode.
REFRESH CHARGE / REFRESH DISCHARGE: they indicate that the battery is in a state of charge or discharge (refresh mode can repair the battery, and can be used to activate the battery to a certain extent and restore the capacity of old battery).
CHARGE TEST: capacity test mode; put the battery and set the current in the capacity
test mode, and then wait for the capacity test results.
IMPEDANCE TEST: internal resistance test, the above four models have the battery resistance test, and the battery internal resistance mode test is to improve the test speed when testing multiple battery resistance.
A. At the discharge end, the current displays 0MA, and the voltage will rise for hundreds of millivolts when reduced to the cut-off voltage.
Suspend heat dissipation:
A． Suspending heat dissipation is to turn off the current temporarily under the high current work for a long time; restart until the temperature drops, and the current also displays 0MA.
A. FULL indicates that the battery is full or the work is accomplished. Charge-discharge, conversion interval of discharge and charge:
A. Setting the discharge-charge conversion or conversion interval of charge and discharge is to better protect the battery, and conversion interval is generally 3-4 minutes, the current during this period is 0 displaying as 0MA. Note: if the temperature protection is happen to be encountered during the transition interval, the temperature protection is over that is, start the operation.
- Material Preparation Time: 7-15 days (or inventory)
- Production & Assembly Time 3-10 days
- Testing & Packaging Time: 2-10 days
- Total Delivery Time: 30-45days
- The faster delivery could be negotiable.
Contact with our sales team for your OEM and ODM order.
If you want to display your own brand LOGO on the goods such as Product, package bag, label or any where. It is no any problem. Our OEM and ODM service is always ready to do it.
According to Stardard Export Packing.
Carton box, wooden box, wooden pallet
|Contact Person :||Miss. Hilary|